Cable Tray Accessories

Black powder coated 30" wide x 118.35" long pathway section used to carry cables horizontally throughout the system. Snap-on sidewalls attach for job specific height requirements. Uses splice connector WGSPL2430BL to connect straight sections and...

BracketThe black powder coated trapeze bracket 0.72" (18.3 mm) high, 12.5" (317.5 mm) long, 2.04" (51.8 mm) wide, and 12.5" (317.5 mm) deep. It is used to support an 8" (203.2 mm) wide Wyr-Grid Pathway from the ceiling using a pair of 1/2" or (12 mm)...

WGTL24PG The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid pathway sections. It comes in standard packages of one.

BracketThe Wyr-Grid Support Bracket is used to support the 24.0" (609.6 mm) wide Wyr-Grid Pathway to standard 3.0" (76.2 mm) or 6.0" (152.4 mm) EIA channel racks. It is black powder coated and is 3.4" (86.4 mm) high, 28.5" (723.9 mm) long, and 7.6" (193...

Wyr-Grid® 12" (305mm) width FiberRunner® QuikLock™ Trapeze Bracket. Attaches to the Wyr-Grid® 12" (305mm) wide Pathway to support a secondary FiberRunner® 4x4 or 6x4 Channel above the Wyr-Grid® Pathway. Adjustable 6 9/16" to 9 7/8" over the top surface...

Used to support the 12” (305mm) wide Wyr-Grid Pathway directly to standard 3” or 6” EIA channel racks. Can be installed as a parallel or perpendicular support for the Wyr-Grid® Pathway. Attaches directly to Panduit channel racks.

BracketThe Wyr-Grid 24" (609.6 mm) FiberRunner QuikLock Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 24.7" (627.4 mm) long, 2.3" (58.4 mm) wide, and 24.7" (627.4 mm) deep. It attaches to the Wyr-Grid 24" (609...

"BRACKET WALL HINGED19""W X 7""H X 6""D 4RMUBLACK ROHS"

The Wyr-Grid® black powder coated, snap-on intersection bend radius control is 6.0" (152 mm) high. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees, crosses, or right angle intersections. It...

Black powder coated bracket used to support the 18" (457mm) wide Wyr-Grid® Pathway along a wall. Integral retaining clip secures the pathway to the bracket. Mounting hardware for attaching to wall not included

Wyr-Grid® 18" (457mm) width FiberRunner® QuikLock™ Trapeze Bracket. Attaches to the Wyr-Grid® 18" (457mm) wide Pathway to support a secondary FiberRunner® 4x4 or 6x4 Channel above the Wyr-Grid® Pathway. Adjustable 6 9/16" to 9 7/8" over the top surface...

Black powder coat Wyr-Grid® 6" (152mm) high Snap-On Sidewalls can be attached anywhere along the pathway where needed to retain cables.