- Performs verification for 10/100/1000BASE-T hubs and PCs.- Locates cables and ports.- Verifies terminated pairs in switches or PCs, wired pairs, and pair reversals.- Provides switch/PC identification.- Detects Power over Ethernet.Further DetailsThe TVR 10/100/1000 Tester provides everything you need to verify and repair 10-, 100-, and 1000-Mbps copper Ethernet. The main unit that performs most tests such as LAN device type, LAN speed, duplex, and PoE. An additional probe enables you to locate cables or switch ports by detecting a tone generated by the handheld tester.The tester enables you to locate faulty switches, PCs, or cable connections that may be interfering with the performance of your 10/100/1000BASE-T network. You can even go inline between two devices to determine the final negotiated speed and duplex of the link. The TVR 10/100/1000 is designed for use by installers and repair people who are documenting legacy LANs, installing and repairing LANs, or expanding existing LANs.The TVR 10/100/1000 Tester is a multifunction tester:- Detects whether a device is a hub, switch, or PC.- Verifies the speed and duplex of a link, enabling you to spot network bottlenecks.- Includes a tone probe and tone generator for tracing cable and port locations.- Shows how cable pairs are wired and identifies straight-pinned and crossover configurations.- Determines the number of cable pairs required by a connected device.- Indicates the presence of Power over Ethernet and whether the power is endspan or midspan.