Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
Scalable runtime Allows additional run time to be quickly added as needed.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Network manageable Provides remote management of the UPS over the network.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
SmartSlot Customize UPS capabilities with management cards.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial Connectivity Provides management of the UPS via a serial port.
Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Audible alarms Provides notification of changing utility power and UPS conditions
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable Provides temporary battery power when the utility power is out.
Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Specification:
Power |
---|
Output power | 6400 W |
Emergency Power Off (EPO) | Yes |
Output power capacity | 8 kVA |
Input frequency | 50/60 Hz |
Performance |
---|
Noise level | 55 dB |
Audible alarm(s) | Yes |
Features |
---|
Output power | 6400 W |
Emergency Power Off (EPO) | Yes |
Noise level | 55 dB |
Audible alarm(s) | Yes |
Output power capacity | 8 kVA |
Input frequency | 50/60 Hz |
Battery |
---|
Battery technology | Sealed Lead Acid (VRLA) |
Battery recharge time | 2.20 h |
Typical backup time at half load | 20 min |
Typical backup time at full load | 7.3 min |
Design |
---|
Product colour | Black |
Certification | CSA,FCC Part 15 Class A,UL 1778 |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 45 °C |
Weight & dimensions |
---|
Weight | 369.7 lbs (167.7 kg) |
Certificates |
---|
Certification | CSA,FCC Part 15 Class A,UL 1778 |
Other features |
---|
Interface | DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot |
Output connections | 1x 3-wire 8x NEMA 5-20R 1x NEMA L14-30R 4x NEMA L6-20R 2x NEMA L6-30R |
Input connection type | 3-wire |
Dimensions (WxDxH) | 15.4 x 29 x 17" (392 x 736 x 432 mm) |
Output voltage note | Configurable for 208 or 240 nominal output voltage |
Nominal input voltage | 208 V |