The SU750XL on-line, double-conversion UPS protects critical server, networking or telecommunications equipment from blackouts, brownouts, voltage fluctuations and surges. Large-capacity 750VA/600W UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at 120V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations and other hard-to-solve power problems not addressed by other UPS systems. True sine wave output and zero transfer time offer guaranteed compatibility with all equipment types. Includes 6 UPS supported outlets; 2 single-outlet load banks can be independently controlled via a software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for the most critical equipment. Extended runtime available with optional BP24V15RT2U, BP24V28-2U, or BP24V70-3U external battery packs. Includes slot for internal SNMP/WEB card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control and monitoring of UPS system and power data. Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Includes Tripp Lite's PowerAlert UPS power management software. Compatible with Tripp Lite's Watchdog service monitoring/rebooting software. Upright tower form factor; attractive all-black color scheme. - True on-line, double-conversion UPS provides constant, pure sine wave AC output - Maintains continuous operation with zero transfer time through blackouts, brownouts, voltage fluctuations and surges - Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems - Accepts input voltages between 80-150V (65-150V at loads under 70%), regulating output to 120V AC +/-2% - 750VA/600W output capacity with 6 x NEMA5-15R outlets - Two built-in individually switchable load banks can be controlled via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for the most critical equipment (1 outlet per bank) - Standard internal battery set provides 11 min. runtime at half load and 4 min. at full load - Extended runtime available with optional BP24V15RT2U, BP24V28-2U, or BP24V70-3U external battery packs - Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) - HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X - DB9 serial network interface supports RS-232 and contact closure messaging - Slot for optional SNMP/WEB card (part# SNMPWEBCARD) - Included PowerAlert UPS power management software and cabling provides monitoring of in-depth site power conditions, full UPS status and fault warnings, output load level and load bank power control - Compatible with Tripp Lite's WatchDog service monitoring/rebooting software (part# WATCHDOGSW) - Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions - Diagnostic LEDs - Upright tower format; attractive all-black color scheme - $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)