SU120KMBPK - Tripp Lite UPS MAINTENANCE BYPASS PANEL FOR TRIPP LITE SV100KL AND SV120KL 3-PHASE UPS SYST

UPS Maintenance Bypass Panel Keeps Equipment Powered During UPS Maintenance This wall-mount three-breaker maintenance bypass panel is compatible with Tripp Lite’s S3M100K, SV100KL and SV120KL 3-phase UPS systems. It allows you to reroute power around the UPS, providing an alternate path for electricity that keeps the connected load operational while the UPS is offline for maintenance or repairs. Features 3 Built-In Circuit Breakers to Isolate Loads Three circuit breakers – an AC input breaker, a maintenance bypass breaker and a maintenance isolation breaker – are connected to heavy-duty buswork and isolate the UPS system from its connected load with no loss of network availability. This allows the load to remain continuously powered without costly downtime. A Kirk-key interlock system enhances safety and security. Removable handles allow the panel’s trim cover to be removed for internal access. The 400A unit has a kAIC rating of 10K. Switching Between Normal and Bypass Modes Is Easy When a UPS needs maintenance, this UPS bypass panel keeps power supplied to components via its mechanical interlock system by switching power to the external bypass breaker. Simply unscrew the interlock switch, rotate the switch from the UPS AC input breaker (SW1) to the bypass breaker (SW2), then turn on the bypass breaker and turn off the UPS and isolation breaker (SW3) to perform UPS maintenance without service interruption. Convenient Wall-Mount Installation Made of galvanized steel, the service bypass panel has rear mounting holes for installation on a smooth, solid wall (mounting hardware not included).

 

Specification:

 

Hard drive
SSD capacity	128 GB
Memory type	SLC
Data transmission
Data transfer rate	6 Gbit/s
Endurance
Mean time between failures (MTBF)	1500000 h
Performance
Interface	Serial ATA III
Component for	PC/notebook
NVMe	No
Sequential read speed (ATTO)	560 MB/s
Sequential write speed (ATTO)	530 MB/s
SSD capacity	128 GB
S.M.A.R.T. support	Yes
TRIM support	Yes
ECC	Yes
Memory type	SLC
Native Command Queuing (NCQ)	Yes
Mean time between failures (MTBF)	1500000 h
Hardware encryption	No
Data transfer rate	6 Gbit/s
Design
Component for	PC/notebook
SSD form factor	M.2
Features
Interface	Serial ATA III
Component for	PC/notebook
NVMe	No
Sequential read speed (ATTO)	560 MB/s
Sequential write speed (ATTO)	530 MB/s
SSD capacity	128 GB
S.M.A.R.T. support	Yes
TRIM support	Yes
ECC	Yes
Memory type	SLC
Native Command Queuing (NCQ)	Yes
Mean time between failures (MTBF)	1500000 h
Hardware encryption	No
Data transfer rate	6 Gbit/s
SSD form factor	M.2
M.2 SSD size	2280 (22 x 80 mm)
Operational conditions
Operating temperature (T-T)	0 - 70 °C
Storage temperature (T-T)	-40 - 85 °C
Maximum operating temperature	70 °C
Technical details
Interface	Serial ATA III
S.M.A.R.T. support	Yes
Operating temperature (T-T)	0 - 70 °C
TRIM support	Yes
Storage temperature (T-T)	-40 - 85 °C
ECC	Yes
Native Command Queuing (NCQ)	Yes
Hardware encryption	No
SSD form factor	M.2
Weight & dimensions
Width	3.15" (80 mm)
Weight	0.282 oz (8 g)
Height	0.138" (3.5 mm)
Depth	0.866" (22 mm)