SU1000RTXL2UA - Tripp Lite 1000VA 800W UPS SMART ONLINE RACKMOUNT 100V-120V USB DB9 2URM

1000VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an installed depth of only 13.5 inches. Extended runtime available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack compatible) or BP24V36-2US (multi-pack compatible) external battery packs. Full-time sine wave 100, 110 or 120V output with +/-2% voltage regulation. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 150V. Highly efficient operation in optional economy mode saves BTU heat output and energy costs. NEMA 5-15P input plug; NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two-bank PDU switching supports load shedding and remote reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only). - SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications - True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions - Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time - Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs - Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types - Corrects line voltage conditions as low as 65V and as high as 150V back to selectable 100/110/120V (+/-2%) values - Standard internal battery set offers 14 minutes runtime at half load (400W) and 4.5 minutes at full load (800W) - Extended runtime available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack compatible) and BP24V36-2US (multi-pack compatible) external battery packs - Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) - Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 13.5 inches - Ships with all mounting accessories for 4 post rackmount installation - Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation - Optional 2-9USTAND accessory enables small-footprint upright tower placement - Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions - Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot - HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X - Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP - UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage set points - Built-in Emergency Power Off (EPO) interface with cable - NEMA 5-15P input plug/NEMA 5-15R output receptacles - Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices (each load bank consists of one outlet) - Front panel LEDs offer current monitoring and battery charge level information - UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required - Single line TEL/DSL or network Ethernet line surge suppression - $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)

 

Specification:

 

Power
Output voltage regulation	2%
Output power	800 W
Input operation voltage (min)	100 V
Input operation voltage (max)	120 V
Output operation voltage (min)	100 V
Output operation voltage (max)	120 V
Surge energy rating	510 J
Maximum current	15 A
Emergency Power Off (EPO)	Yes
Power factor	0.8
Crest factor	3:1
Output power capacity	1 kVA
Efficiency (Line Mode)	87%
Efficiency (ECO mode)	96%
Input frequency	50/60 Hz
Ports & interfaces
Cable length	122" (3.1 m)
Emergency Power Off (EPO) connector	Yes
Serial interface	Yes
Serial interface type	RS-232
AC outlet types	NEMA 5-15R
Power plug	NEMA 5-15P
Modem (RJ-11) ports	1
Ethernet LAN (RJ-45) ports	1
Performance
UPS topology	Double-conversion (Online)
Number of input phases	1
EMI/RFI noise filtering	Yes
Surge protection	Yes
Features
Country of origin	China
UPS topology	Double-conversion (Online)
Output voltage regulation	2%
Number of input phases	1
Output power	800 W
Input operation voltage (min)	100 V
Input operation voltage (max)	120 V
Output operation voltage (min)	100 V
Output operation voltage (max)	120 V
Surge energy rating	510 J
Maximum current	15 A
EMI/RFI noise filtering	Yes
Surge protection	Yes
Emergency Power Off (EPO)	Yes
Power factor	0.8
Crest factor	3:1
Output power capacity	1 kVA
Efficiency (Line Mode)	87%
Efficiency (ECO mode)	96%
Input frequency	50/60 Hz
Battery
Typical backup time at half load	14 min
Typical backup time at full load	4.5 min
Hot-swap battery	Yes
Cold start	Yes
Design
Country of origin	China
Rack capacity	2U
Form factor	Rackmount/Tower
Product colour	Black
Cable length	122" (3.1 m)
Housing material	Steel
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	0 - 95%
Technical details
Sustainability certificates	RoHS
Weight & dimensions
Package width	19.9" (505.5 mm)
Package depth	23.3" (591.8 mm)
Package height	9.1" (231.1 mm)
Weight	29.1 lbs (13.2 kg)
Width	17.5" (444.5 mm)
Package weight	39.9 lbs (18.1 kg)
Height	3.5" (88.9 mm)
Depth	13.5" (342.9 mm)
Packaging data
Rack mount kit	Yes
Manual	Yes
Cables included	Serial, USB cable
Package width	19.9" (505.5 mm)
Package depth	23.3" (591.8 mm)
Package height	9.1" (231.1 mm)
Package weight	39.9 lbs (18.1 kg)
Logistics data
Products per master (outer) case	1 pc(s)
Packaging content
Rack mount kit	Yes
Manual	Yes
Cables included	Serial, USB cable