ST5GPEXNB - StarTech.com PCIE NETWORK ADAPTER CARD W/1 PORT 5GBE NIC FOR PERFORMANCE - 4 SPEED MULTI-GIGA

Add an Ethernet port to a PC client, server or workstation supporting four network speeds: 5G/2.5G/1G/100Mbps

This 4-speed NBASE-T PCIe network card offers an inexpensive network upgrade solution, providing access to your network at multiple speeds up to 5G, using your existing Cat5e copper cabling.

Cost-effective Multi-Gigabit Ethernet

Fully compliant with 2.5GBASE-T, 5GBASE-T, and NBASE-T (Draft IEEE802.3bz) specifications, the PCIe NIC offers a cost-effective and versatile networking solution. It provides additional bandwidth at multiple speeds, to meet your network needs without the expense of overhauling your existing cable infrastructure.

Advanced technology for optimal performance

The featured NBASE-T technology and multi-gigabit speeds support Cisco campus switches, including Catalyst 4500E, 3850 and 3560-CX. The Marvell 88E2010 chipset is optimized for achieving 2.5 and 5G rates over your existing Cat5e copper cable setup without upgrading to the more expensive Cat6A cabling required for 10Gbps speeds.

Operating efficiency and flexible use

The Tehuti Networks TN4010 chipset, compliant with IEEE 802.3az, ensures peak operating efficiency with reduced power consumption. The network card also supports 9K jumbo frames, 802.1q VLAN tagging and is backward compatible with 1000BASE-T. For additional versatility, the controller card is equipped with a standard-profile bracket and includes a low-profile bracket for installation in small form-factor computers.

The ST5GPEXNB is backed by a StarTech.com 2-year warranty.

The StarTech.com Advantage

- 1 PORT 5GbE NETWORK CARD: Single port 5Gbps PCIe Network Adapter Card provides 5x speed of standard Gigabit Ethernet to desktop/server leveraging existing infrastructure of Cat5e, CAT6, or CAT6a cable
- TECH SPECS: 5 Gbps Multi-Gigabit
- 1x RJ45

 

Specification:

 

Hard drive
HDD sustained transfer rate	190 MiB/s
HDD interface transfer rate	6 Gbit/s
Bytes per sector	4096
HDD number of heads	12
Mean time between failures (MTBF)	800000 h
Start/stop cycles	300000
HDD size	3.5"
HDD capacity	6000 GB
Features
Type	HDD
HDD sustained transfer rate	190 MiB/s
HDD interface transfer rate	6 Gbit/s
Interface	Serial ATA III
Bytes per sector	4096
HDD number of heads	12
Mean time between failures (MTBF)	800000 h
Start/stop cycles	300000
HDD size	3.5"
HDD capacity	6000 GB
Storage drive buffer size	128 MB
Power
Operating voltage	5 / 12 V
Power consumption (typical)	5.5 W
Power consumption (standby)	0.75 W
Power consumption (idle)	3.5 W
Operational conditions
Operating temperature (T-T)	0 - 60 °C
Storage temperature (T-T)	-40 - 70 °C
Technical details
Sustainability certificates	RoHS
Operating voltage	5 / 12 V
Interface	Serial ATA III
Mean time between failures (MTBF)	800000 h
Weight & dimensions
Width	4" (101.6 mm)
Weight	27.5 oz (780 g)
Height	1.03" (26.1 mm)
Depth	5.79" (147 mm)
Other features
Operating voltage	5 / 12 V
Interface	Serial ATA III