ST121HDBTE - StarTech.com EXTEND HDMI UP TO 230FT (70M) OVER A SINGLE CAT 5E / CAT 6 CABLE WITH POWER OVER

Extend HDMI® up to 230ft (70m) over a single CAT5e/6 cable with Power over Cable to ReceiverThe StarTech.com HDBaseT extender kit, extends HDMI up to 230 feet (70 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD and Full HD resolutions (4K / 1080p) with support for 3D and the accompanying digital audio. For added versatility, both the transmitter and receiver can be powered by the same single power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, and hospitals.What is HDBaseT?HDBaseT is a standardized, zero latency, video distribution technology that’s revolutionizing HDMI distribution. HDBaseT uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio and video along with additional signals such as 100BaseT Ethernet, IR, RS-232 serial and power over cable.Extend more with HDBaseTThe extender offers HDBaseT technology with HDMI and Power in a single extender kit, for complete end-to-end solution. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBaseT is the clear choice for every integrator and system designer. The added benefit of power over cable means you’ll only need one power source at either side of your extension, great for extending video to areas where power outlets may be limited, such as industrial sites.Astonishing 4K picture quality from an impressive distanceWith the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet.With support for 4K you’ll be amazed at how HDBaseT maintains your Ultra HD picture quality, four times the resolution of high-definition 1080p, even at 130 feet away from your video source. Plus, because the extender supports High-Definition 1080p and lower resolutions at 230 feet away, you can comfortably use this extender to make any video source look great.Simplify your setupThis extender has been specially crafted for a smooth, tidy installation. HDBaseT technology allows for single cable installation, for seamless integration using existing CAT5e or CAT6 infrastructure, avoiding the hassle of running multiple Ethernet cables while, reducing potential failure points. Plus, the added benefit of power over cable means you’ll only need one power source to power both your extender and receiver, great for extending to areas where power outlets may be limited. Mounting hardware is also included for both the extender and receiver for discrete, professional mounting.The ST121HDBTE is TAA compliant and backed by a 2-year StarTech.com warranty with free lifetime technical support.The StarTech.com Advantage

 

Specification:

 

Features
Audio output channels	7.1 channels
Daisy chain	No
HDBaseT certified	Yes
Maximum refresh rate	60 Hz
Certification	FCC, CE, TAA
Type	AV transmitter & receiver
Maximum resolution	4096 x 2160 pixels
Cable types supported	Cat5e,Cat6
Maximum transfer distance	3937" (100 m)
Audio system	Multichannel
Supported video modes	720p,1080p
Supported graphics resolutions	1280 x 720 (HD 720),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA),2560 x 1600 (WQXGA),3840 x 2160,4096 x 2160
LED indicators	Status
Product colour	Black
Rubber feet	Yes
Ports & interfaces
Remote (IR) output	1
Remote (IR) input	1
RS-232 output ports	1
RS-232 input ports	1
Serial interface type	RS-232
RJ-45 input ports	1
RJ-45 output ports	1
HDMI in	1
Number of HDMI outputs	1
Connectivity technology	Wired
Power
Input current	0.6 A
Output current	1.5 A
Power plug type	Type M
AC input voltage	100 - 240 V
Power consumption (typical)	18 W
External power adapter	Yes
Operating voltage	12 V
Weight & dimensions
Receiver weight	15.9 oz (452 g)
Transmitter weight	15.9 oz (452 g)
Transmitter dimensions (WxDxH)	2.6 x 3.62 x 1.06" (66 x 92 x 27 mm)
Receiver dimensions (WxDxH)	2.6 x 3.62 x 1.06" (66 x 92 x 27 mm)
Packaging data
Package depth	11.1" (281 mm)
Package width	7.64" (194 mm)
Package height	2.76" (70 mm)
Package weight	2.43 lbs (1.1 kg)
Packaging content
IR receiver included	Yes
IR blaster included	Yes
Mounting brackets included	Yes
Cables included	LAN (RJ-45)
AC adapter included	Yes
Included power plug types	ANZ,NA,UK
Technical details
Sustainability certificates	RoHS
Logistics data
Master (outer) case width	16.1" (410 mm)
Master (outer) case length	17.5" (445 mm)
Master (outer) case height	12.6" (320 mm)
Products per master (outer) case	12 pc(s)