SRT3000RMXLT-NC - APC SMART-UPS SRT 3000VA RM 208V NETWORK CARD

Features APC Smart-UPS SRT 3000VA RM 208V Network Card High density, double-conversion on-line power protection with scalable runtime Includes : CD with software , Documentation CD , Installation guide , Network Management Card , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , USB cable , Warranty card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Availability Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Scalable runtime Allows additional run time to be quickly added as needed. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Manageability SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Serial connectivity Provides management of the UPS via a serial port. Network manageable Provides remote power management of the UPS over the network. Adaptability Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Marketing Features Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional Ethernet. Includes Powerchute Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Serviceability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Audible alarms Provides notification of changing utility power and UPS power conditions Disconnected battery notification Warns when a battery is not available to provide backup power. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Protection Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.

 

Specification:

 

Power
Output frequency	50/60 Hz
Output frequency regulation	50/60 Hz
Output power	2700 W
Input operation voltage (min)	100 V
Input operation voltage (max)	275 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	340 J
Efficiency	93.5%
Emergency Power Off (EPO)	Yes
Crest factor	3:1
Output power capacity	3 kVA
Input frequency	40/70 Hz
Ports & interfaces
Cable length	96.1" (2.44 m)
USB port	Yes
Serial interface	Yes
Serial interface type	RJ-45
SmartSlot	Yes
AC outlets quantity	8 AC outlet(s)
AC outlet types	C13 coupler, C19 coupler
Power plug	C20 coupler
Number of output IEC jumpers	2
Performance
UPS topology	Double-conversion (Online)
Waveform	Sine
Auto-restart	Yes
LED indicators	Yes
Surge protection	Yes
Noise level	55 dB
Audible alarm(s)	Yes
Features
Output frequency	50/60 Hz
Web-based management	Yes
UPS topology	Double-conversion (Online)
Waveform	Sine
Output frequency regulation	50/60 Hz
Auto-restart	Yes
Output power	2700 W
Input operation voltage (min)	100 V
Input operation voltage (max)	275 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	340 J
Efficiency	93.5%
Surge protection	Yes
Emergency Power Off (EPO)	Yes
Noise level	55 dB
Crest factor	3:1
Audible alarm(s)	Yes
Output power capacity	3 kVA
Input frequency	40/70 Hz
Battery
Battery life (max)	5 year(s)
Battery capacity	505 VAh
Number of batteries supported	1
Battery technology	Sealed Lead Acid (VRLA)
Battery recharge time	3 h
Typical backup time at half load	11.8 min
Typical backup time at full load	4 min
Hot-swap battery	Yes
Cold start	Yes
Automatic battery test	Yes
Design
International Protection (IP) code	IP20
Rack capacity	2U
Form factor	Rackmount/Tower
LED indicators	Yes
Product colour	Black
Certification	CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE, REACH
Cable length	96.1" (2.44 m)
Display type	LCD
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Operating altitude	0 - 118110.2" (0 - 3000 m)
Non-operating altitude	0 - 590551.2" (0 - 15000 m)
Technical details
Output frequency	50/60 Hz
Sustainability certificates	RoHS, ENERGY STAR
Harmonized System (HS) code	85078000
Management features
Web-based management	Yes
Weight & dimensions
Package width	23.6" (599 mm)
Package depth	34.3" (871 mm)
Package height	9.69" (246 mm)
Weight	69 lbs (31.3 kg)
Width	17" (432 mm)
Package weight	88 lbs (39.9 kg)
Height	3.35" (85 mm)
Depth	25" (635 mm)
Packaging data
Rack mount kit	Yes
Quick installation guide	Yes
Cables included	USB cable
Bracket	Yes
Warranty card	Yes
Software CD	Yes
Package width	23.6" (599 mm)
Package depth	34.3" (871 mm)
Package height	9.69" (246 mm)
Package weight	88 lbs (39.9 kg)
Logistics data
Products per pallet	6 pc(s)
Certificates
Certification	CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE, REACH
Other features
Nominal output voltage	230 V
Nominal input voltage	230 V
Packaging content
Rack mount kit	Yes
Quick installation guide	Yes
Cables included	USB cable
Bracket	Yes
Warranty card	Yes
Software CD	Yes