Sidebar Sidebar Sidebar

SRT3000RMXLA-NC - APC SMART-UPS SRT 3000VA RM 120V NETWORK CARD

Write a Review
$7,889.17
$4,382.87
(You save $3,506.30 )

Have questions?

Adding to cart… The item has been added
SKU: SRT3000RMXLA-NC
Availability: In Stock
Weight: 89.15 LBS
Shipping: Calculated at Checkout
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
SRT3000RMXLA-NCFeatures APC Smart-UPS SRT 3000VA RM 120V Network Card High density, double-conversion on-line power protection with scalable runtime Includes : CD with software , Documentation CD , Installation guide , Network Management Card , Rack Mounting brackets , Rack Mounting support rails , USB cable , Warranty card - 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection - Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance - ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection - Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. - LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. - Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Serviceability - Audible alarms Provides notification of changing utility power and UPS power conditions - Disconnected battery notification Warns when a battery is not available to provide backup power. - Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. - Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. - User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Protection - Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. - Cold-start capable Provides temporary battery power when the utility power is out. - Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. - Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. - Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. - Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. - Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Manageability - Network manageable Provides remote power management of the UPS over the network. - Serial connectivity Provides management of the UPS via a serial port. - SmartSlot Customize UPS capabilities with management cards. - LED status indicators Quickly understand unit and power status with visual indicators. - InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Adaptability - Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. - Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. - Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Availability - Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. - Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. - Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. - Scalable runtime Allows additional run time to be quickly added as needed. - Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. - Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Marketing Features - Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events. - Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. - Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. - Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

 

Specification:

 

Power
Output frequency50/60 Hz
Output power2700 W
Input operation voltage (min)100 V
Input operation voltage (max)275 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge energy rating340 J
Efficiency92%
Emergency Power Off (EPO)Yes
Output voltage Total Harmonic Distortion (THD)2%
Crest factor3:1
Output power capacity3 kVA
Input frequency40 - 70 Hz
Ports & interfaces
Cable length96.1" (2.44 m)
USB portYes
Serial interfaceYes
Serial interface typeRJ-45
SmartSlotYes
AC outlet typesC13 coupler, C19 coupler
Power plugC20 coupler
Performance
Audible alarm modesBattery replacement
UPS topologyDouble-conversion (Online)
WaveformSine
Auto-restartYes
Automatic Voltage Regulation (AVR)Yes
LED indicatorsBattery replacement
Surge protectionYes
Power protection featuresOverload
Noise level55 dB
Audible alarm(s)Yes
Features
Output frequency50/60 Hz
Audible alarm modesBattery replacement
UPS topologyDouble-conversion (Online)
WaveformSine
Auto-restartYes
Automatic Voltage Regulation (AVR)Yes
Output power2700 W
Input operation voltage (min)100 V
Input operation voltage (max)275 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Surge energy rating340 J
Efficiency92%
Surge protectionYes
Emergency Power Off (EPO)Yes
Power protection featuresOverload
Output voltage Total Harmonic Distortion (THD)2%
Noise level55 dB
Crest factor3:1
Audible alarm(s)Yes
Output power capacity3 kVA
Input frequency40 - 70 Hz
Battery
Battery life (max)5 year(s)
Battery capacity505 VAh
Battery technologySealed Lead Acid (VRLA)
Battery recharge time3 h
Typical backup time at half load11.8 min
Typical backup time at full load4 min
Hot-swap batteryYes
Cold startYes
Automatic battery testYes
Design
International Protection (IP) codeIP20
Rack capacity2U
Form factorRackmount
LED indicatorsBattery replacement
Product colourBlack
CertificationCE, VDE, RCM, EAC, IEC/EN 62040-1, IEC/EN 62040-2, UL-1778, FCC 15 A, CSA
Cable length96.1" (2.44 m)
Display typeLCD
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 45 °C
Operating relative humidity (H-H)0 - 95%
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 118110.2" (0 - 3000 m)
Non-operating altitude0 - 590551.2" (0 - 15000 m)
Technical details
Output voltage230 V
Output frequency50/60 Hz
Sustainability certificatesRoHS
Harmonized System (HS) code85078000
Weight & dimensions
Package width23.6" (599 mm)
Package depth34.3" (871 mm)
Package height9.69" (246 mm)
Weight69 lbs (31.3 kg)
Width17" (432 mm)
Package weight86.6 lbs (39.3 kg)
Height3.35" (85 mm)
Depth25" (635 mm)
Packaging data
Quick installation guideYes
Package width23.6" (599 mm)
Package depth34.3" (871 mm)
Package height9.69" (246 mm)
Package weight86.6 lbs (39.3 kg)
Logistics data
Products per pallet6 pc(s)
Certificates
CertificationCE, VDE, RCM, EAC, IEC/EN 62040-1, IEC/EN 62040-2, UL-1778, FCC 15 A, CSA
Other features
Output voltage230 V
Packaging content
Quick installation guideYes

Customers Also Viewed