SP001TBP34A60M28 - Silicon Power 1TB A60 NVME M.2 PCIE GEN3X4 2280

A Fundamental PCIe Gen3x4 That Goes Further The P34A60 is an affordable storage solution that doesn't skimp on performance. It's designed for novice users, DIY system builders, purpose-built system manufacturers, and simply those who are looking to upgrade their PC. But with a PCIe Gen3x4 interface, which means four lanes are used for transmitting and receiving data simultaneously, read speeds up to 2,200 MB/s, and write speeds up to 1,600 MB/s, this SSD is anything but basic. NVMe 1.3 + HMB = Optimum Performance The P34A60 supports NVMe 1.3, which demands better performance vectors than AHCI (Advanced Host Controller Interface), including scalable bandwidth, increased IOPS, and low latency. In addition, HMB (Host Memory Buffer) architecture, which allows the host driver to allocate system memory (RAM) for exclusive use by the SSD, results in higher efficiency. It's this teamwork that provides optimum performance. Your Data In Good Hands The P34A60 is engineered with LDPC (Low-Density Parity Check) coding, a powerful error correction code (ECC) algorithm, to keep data secure. Furthermore, End-To-End (E2E) data protection, to ensure that accessed and retrieved data are correct from start to finish, and a RAID engine, which provides an acceptable level of fault tolerance, work to enhance data integrity for greater reliability and stability. A System Upgrade With Room For More With an M.2 2280 (80mm) form factor, the P34A60's compact size allows for easy installation in laptops, small form factor PC systems, and some ultrabooks. And with up to a massive 2TB capacity option, it's an easy upgrade that can greatly expand your system's storage potential while also saving space for other components.

 

Specification:

 

Hard drive
SSD capacity	1000 GB
Memory type	3D TLC
Data transmission
Data transfer rate	6 Gbit/s
Endurance
Mean time between failures (MTBF)	1500000 h
Performance
Interface	Serial ATA III
Component for	PC
NVMe	No
Sequential write speed (CDM)	450 MB/s
Sequential read speed (CDM)	500 MB/s
Sequential read speed (ATTO)	560 MB/s
Sequential write speed (ATTO)	530 MB/s
SSD capacity	1000 GB
S.M.A.R.T. support	Yes
TRIM support	Yes
RAID support	Yes
ECC	Yes
Memory type	3D TLC
Native Command Queuing (NCQ)	Yes
Mean time between failures (MTBF)	1500000 h
Data transfer rate	6 Gbit/s
Design
Component for	PC
Product colour	Black
SSD form factor	2.5"
Features
Interface	Serial ATA III
Component for	PC
NVMe	No
Sequential write speed (CDM)	450 MB/s
Sequential read speed (CDM)	500 MB/s
Sequential read speed (ATTO)	560 MB/s
Sequential write speed (ATTO)	530 MB/s
SSD capacity	1000 GB
S.M.A.R.T. support	Yes
TRIM support	Yes
RAID support	Yes
ECC	Yes
Memory type	3D TLC
Native Command Queuing (NCQ)	Yes
Mean time between failures (MTBF)	1500000 h
Data transfer rate	6 Gbit/s
SSD form factor	2.5"
Harmonized System (HS) code	84717070
Power
Operating voltage	5 V
Operational conditions
Operating shock	1500 G
Operating vibration	20 G
Technical details
Interface	Serial ATA III
S.M.A.R.T. support	Yes
TRIM support	Yes
RAID support	Yes
ECC	Yes
Operating shock	1500 G
Operating vibration	20 G
Native Command Queuing (NCQ)	Yes
Product colour	Black
SSD form factor	2.5"
Sustainability certificates	RoHS
Weight & dimensions
Width	2.75" (69.9 mm)
Weight	2.22 oz (63 g)
Height	0.276" (7 mm)
Depth	3.94" (100 mm)
Other features
Product colour	Black