SMX700HG - Tripp Lite SMARTPRO MEDICAL GRADE .7KVA 230V LINE INTERACTIVE TOWER UPS, FULL ISOLATION, US

Tripp Lite’s SMX700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 36 minutes of runtime for a half load, or 14.5 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX700HG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules. The SMX700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Application Usage This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX700HG in this type of application will void the battery warranty. Provides Ideal UPS Backup in Healthcare Facilities Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Battery Backup and Full Surge Protection 36 minutes runtime for half load (225W); 14.5 minutes for full load (450W) All six hospital-grade outlets provide surge protection rated to 340 joules EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference Resistant to electrostatic discharge LEDs and Audible Alarms Keep You Aware of Power Status Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed Saves Your Files, Even When You’re Away Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failures Connects to your computer via either the DB9 port or USB port

 

Specification:

 

Power
Output power	450 W
Input operation voltage (min)	230 V
Input operation voltage (max)	230 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	340 J
Maximum current	10 A
Output power capacity	0.7 kVA
Performance
UPS topology	Line-Interactive
Waveform	Sine
Number of input phases	1
Features
Country of origin	China
UPS topology	Line-Interactive
Waveform	Sine
Number of input phases	1
Output power	450 W
Input operation voltage (min)	230 V
Input operation voltage (max)	230 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	340 J
Maximum current	10 A
Output power capacity	0.7 kVA
Ports & interfaces
USB port	Yes
Serial interface	Yes
AC outlets quantity	6 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C14 coupler
Battery
Typical backup time at half load	36 min
Typical backup time at full load	14.5 min
Design
Country of origin	China
Form factor	Tower
Product colour	Gray
Certification	CE, UL60601-1
Housing material	Polyvinyl chloride (PVC)
Operational conditions
Operating temperature (T-T)	32 - 104 °C
Storage temperature (T-T)	5 - 122 °C
Operating relative humidity (H-H)	0 - 95%
Technical details
Harmonized System (HS) code	85078000
Weight & dimensions
Package width	12.2" (309.9 mm)
Package depth	13.4" (339.9 mm)
Package height	18.5" (469.9 mm)
Weight	31.5 lbs (14.3 kg)
Width	7.5" (190.5 mm)
Package weight	34.8 lbs (15.8 kg)
Height	12.7" (322.6 mm)
Depth	9.05" (229.9 mm)
Packaging data
Package width	12.2" (309.9 mm)
Package depth	13.4" (339.9 mm)
Package height	18.5" (469.9 mm)
Package weight	34.8 lbs (15.8 kg)
Logistics data
Products per master (outer) case	1 pc(s)
Master (outer) case width	12.2" (309.9 mm)
Master (outer) case length	13.4" (339.9 mm)
Master (outer) case height	18.5" (469.9 mm)
Master (outer) case gross weight	34.8 lbs (15.8 kg)
Master (outer) case GTIN (EAN/UPC)	00037332224804
Certificates
Certification	CE, UL60601-1