SMX3000LVNC - APC SMART-UPS X 3000VA RACK/TOWER LCD 100-127V WITH NETWORK CARD

Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Auto recognition of external batteries UPS recognizes when external battery packs are attached and automatically adjusts runtime. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Load shedding Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups). Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Multiple switched outlet groups Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. Wide input voltage range Designed for harsh electrical environments to save battery life. StruxureWare Central compatible Enables centralized management via StruxureWare Central. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance High online efficiency Reduces utlility costs, generates less heat. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Overload protection Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload. SmartSlot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power and UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) USB connectivity Provides management of the UPS via a USB port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Network manageable Provides remote power management of the UPS over the network. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Sequenced network shutdown and reboot Customize network shutdown and reboot sequence of connected servers and UPSs.

 

Specification:

 

Power
Output frequency	50/60 Hz
Output power	2700 W
Input operation voltage (min)	70 V
Input operation voltage (max)	153 V
Output operation voltage (max)	120 V
Surge energy rating	540 J
Maximum current	15 A
Emergency Power Off (EPO)	Yes
Output voltage Total Harmonic Distortion (THD)	5%
Output power capacity	2.88 kVA
Input frequency	50/60 Hz
Ports & interfaces
Cable length	96.1" (2.44 m)
USB port	Yes
Serial interface	Yes
SmartSlot	Yes
AC outlets quantity	10 AC outlet(s)
AC outlet types	NEMA 5–15R,NEMA 5–20R,NEMA L5-30R
Power plug	NEMA L5-30P
Performance
Audible alarm modes	Alarm when on battery, Low battery alarm, Overload alarm
UPS topology	Line-Interactive
Waveform	Sine
Auto-restart	Yes
Automatic Voltage Regulation (AVR)	Yes
LED indicators	Yes
EMI/RFI noise filtering	55 dB
Power protection features	Overload
Audible alarm(s)	Yes
Features
Output frequency	50/60 Hz
Web-based management	Yes
Audible alarm modes	Alarm when on battery, Low battery alarm, Overload alarm
UPS topology	Line-Interactive
Waveform	Sine
Auto-restart	Yes
Automatic Voltage Regulation (AVR)	Yes
Output power	2700 W
Input operation voltage (min)	70 V
Input operation voltage (max)	153 V
Output operation voltage (max)	120 V
Surge energy rating	540 J
Maximum current	15 A
EMI/RFI noise filtering	55 dB
Emergency Power Off (EPO)	Yes
Power protection features	Overload
Output voltage Total Harmonic Distortion (THD)	5%
Audible alarm(s)	Yes
Output power capacity	2.88 kVA
Input frequency	50/60 Hz
Battery
Battery life (max)	5 year(s)
Battery technology	Sealed Lead Acid (VRLA)
Battery recharge time	3 h
Hot-swap battery	Yes
Cold start	Yes
Automatic battery test	Yes
Design
Rack capacity	4U
Form factor	Rackmount/Tower
LED indicators	Yes
Product colour	Black
Certification	BSMI, CSA, EN 50091-2, EN 55022 Class A, FCC Part 15 Class A, NOM, TAA, TUV, UL
Cable length	96.1" (2.44 m)
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Operating altitude	0 - 118110.2" (0 - 3000 m)
Non-operating altitude	0 - 590551.2" (0 - 15000 m)
Technical details
Output frequency	50/60 Hz
Sustainability certificates	RoHS, ENERGY STAR
Management features
Web-based management	Yes
Weight & dimensions
Weight	85.1 lbs (38.6 kg)
Width	7.01" (178 mm)
Height	17" (432 mm)
Depth	19" (483 mm)
Package width	23.1" (586 mm)
Package depth	24.9" (633 mm)
Package height	13" (330 mm)
Package weight	105.2 lbs (47.7 kg)
Packaging data
Screws included	Yes
Resource CD	Yes
Rack mount kit	Yes
Quick installation guide	Yes
Cables included	RS-232, USB cable
Bracket	Yes
Software CD	Yes
Package width	23.1" (586 mm)
Package depth	24.9" (633 mm)
Package height	13" (330 mm)
Package weight	105.2 lbs (47.7 kg)
Logistics data
Products per pallet	6 pc(s)
Certificates
Certification	BSMI, CSA, EN 50091-2, EN 55022 Class A, FCC Part 15 Class A, NOM, TAA, TUV, UL
Packaging content
Screws included	Yes
Resource CD	Yes
Rack mount kit	Yes
Quick installation guide	Yes
Cables included	RS-232, USB cable
Bracket	Yes
Software CD	Yes