SMX2200XLRT2U - Tripp Lite 2200VA 1600W UPS INTERNATIONAL SMART RACKMOUNT AVR 230V 2URM

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional network management card option. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules. Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 158 to 278V C20 AC power inlet; 8 C13 output receptacles, Two independently switchable output load banks Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emissions Internal batteries offer 11.9 minutes at 50% load (960W) and 5 minutes at 100% load (1920W) Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT3U (no limit) or BP48V27-2US (no limit) external battery packs (max output is reduced to 1600w with external battery packs connected) External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment Intelligent battery management system extends battery life Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information LCD interface also supports a number of advanced user setup and operating preferences Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement Built-in USB, RS-232 and optional network management card options Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations IP-based Auto Probe detects lost connectivity and restores service autonomously HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download fromTripp Lite website. Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment

 

Specification:

 

Power
Output frequency	50/60 Hz
Output voltage regulation	-15 - 6%
Output power	1920 W
Input operation voltage (min)	158 V
Input operation voltage (max)	278 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	350 J
Maximum current	10.7 A
Emergency Power Off (EPO)	Yes
Power factor	0.87
Output power capacity	2.2 kVA
Efficiency (On-line mode)	98%
Input frequency	50/60 Hz
Performance
Audible alarm modes	Alarm when on battery, Fault, Low battery alarm, Overload alarm
UPS topology	Line-Interactive
Waveform	Pure sine
Automatic Voltage Regulation (AVR)	Yes
Number of input phases	1
LED indicators	Yes
EMI/RFI noise filtering	Yes
Surge protection	Yes
Noise level	45 dB
Audible alarm(s)	Yes
Features
Output frequency	50/60 Hz
Country of origin	China
Audible alarm modes	Alarm when on battery, Fault, Low battery alarm, Overload alarm
UPS topology	Line-Interactive
Waveform	Pure sine
Output voltage regulation	-15 - 6%
Automatic Voltage Regulation (AVR)	Yes
Number of input phases	1
Output power	1920 W
Input operation voltage (min)	158 V
Input operation voltage (max)	278 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Surge energy rating	350 J
Maximum current	10.7 A
EMI/RFI noise filtering	Yes
Surge protection	Yes
Emergency Power Off (EPO)	Yes
Power factor	0.87
Noise level	45 dB
Audible alarm(s)	Yes
Output power capacity	2.2 kVA
Efficiency (On-line mode)	98%
Input frequency	50/60 Hz
Ports & interfaces
Emergency Power Off (EPO) connector	Yes
USB port	Yes
Serial interface	Yes
AC outlets quantity	8 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C20 coupler
USB 2.0 ports quantity	3
RS-232 ports	1
Ethernet LAN (RJ-45) ports	1
Battery
Typical backup time at half load	11.9 min
Typical backup time at full load	5 min
Hot-swap battery	Yes
Cold start	Yes
Design
Country of origin	China
Rack capacity	2U
Form factor	Rackmount
LED indicators	Yes
Product colour	Black
Cooling type	Active
Certification	CE, IEC 62040-1, IEC 62040-2 Class A EMI, GOST
Built-in fan	Yes
Housing material	Steel
Display type	LCD
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Technical details
Output frequency	50/60 Hz
Sustainability certificates	RoHS
Cooling
Cooling type	Active
Built-in fan	Yes
Weight & dimensions
Package width	24.2" (614.7 mm)
Package depth	21.5" (546.1 mm)
Package height	8.7" (221 mm)
Weight	68.8 lbs (31.2 kg)
Width	17.5" (444.5 mm)
Package weight	73.6 lbs (33.4 kg)
Height	3.5" (88.9 mm)
Depth	19.5" (495.3 mm)
Packaging data
Rack mount kit	Yes
Manual	Yes
Cables included	Input power cable, Output power cable, Serial, USB cable
Package width	24.2" (614.7 mm)
Package depth	21.5" (546.1 mm)
Package height	8.7" (221 mm)
Package weight	73.6 lbs (33.4 kg)
Logistics data
Products per master (outer) case	1 pc(s)
Certificates
Certification	CE, IEC 62040-1, IEC 62040-2 Class A EMI, GOST
Packaging content
Rack mount kit	Yes
Manual	Yes
Cables included	Input power cable, Output power cable, Serial, USB cable