SMX1000RT2U - Tripp Lite 1000VA 700W UPS INTERNATIONAL SMART RACKMOUNT AVR 230V C13 2U

The SMX1000RT2U SmartPro 230V 1kVA 900W Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up point-of-sale applications, VoIP systems and small business networks, the SMX1000RT2U switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss. Featuring six C13 outlets (four switchable) and a C14 inlet that accepts a user-supplied AC power cord, the SMX1000RT2U has an internal battery that provides 11.9 minutes of support at half load and 3.6 minutes at full load. A front-panel LCD screen lets you configure settings and monitor important data, such as load level, voltage, battery charge and estimated runtimes. Automatic voltage regulation (AVR) maintains 230V nominal output over an input range of 182V to 278V without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 350-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free downloadable PowerAlert® software, the SMX1000RT2U enables safe unattended system shutdown and file saves in case of a prolonged power failure. Adding an optional Network Management Card permits remote management of the UPS. Protects Mission-Critical Rack-Mounted Equipment Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks Audible alarm signals loss of utility power, overload, low battery and fault conditions 6 C13 outlets C14 inlet accepts user-supplied AC power cord with country-specific plug 350-joule surge suppression rating Reliable Battery Backup Supports half load up to 11.9 min. and full load up to 3.6 min. Internal batteries designed for hot-swap field replacement 97% line-power efficiency rating saves money in energy costs 2 Load Banks with Switchable Outlets Can control 4 outlets remotely to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR) Maintains 230V nominal output over input range of 182V–278V without using battery power EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance Interactive LCD Screen Front-panel LCD signals voltage, battery and load statuses Supports multiple advanced user setup and operating preferences Rotates for easy viewing in rack-mount or tower configurations Optional Network Management Cards Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations IP-based Auto Probe detects lost connectivity and restores service autonomously Communications Ports USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite’s Power Alert software (available via free download at www.tripplite.com/poweralert) EPO port supports emergency shutdown in large facilities Versatile Installation Options Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory Mounts in upright tower position with optional 2-9USTAND accessory "

 

Specification:

 

Power
Output voltage regulation	-11 - 6%
Output power	900 W
Input operation voltage (min)	182 V
Input operation voltage (max)	278 V
Output operation voltage (min)	220 V
Output operation voltage (max)	230 V
Surge energy rating	350 J
Maximum current	4.8 A
Emergency Power Off (EPO)	Yes
Power factor	0.9
Output power capacity	1 kVA
Efficiency (On-line mode)	97%
Input frequency	50/60 Hz
Performance
Audible alarm modes	Alarm when on battery, Fault, Low battery alarm, Overload alarm
UPS topology	Line-Interactive
Waveform	Pure sine
Automatic Voltage Regulation (AVR)	Yes
Number of input phases	1
Response time	2 ms
LED indicators	Yes
EMI/RFI noise filtering	Yes
Noise level	45 dB
Audible alarm(s)	Yes
Features
Country of origin	China
Audible alarm modes	Alarm when on battery, Fault, Low battery alarm, Overload alarm
UPS topology	Line-Interactive
Waveform	Pure sine
Output voltage regulation	-11 - 6%
Automatic Voltage Regulation (AVR)	Yes
Number of input phases	1
Response time	2 ms
Output power	900 W
Input operation voltage (min)	182 V
Input operation voltage (max)	278 V
Output operation voltage (min)	220 V
Output operation voltage (max)	230 V
Surge energy rating	350 J
Maximum current	4.8 A
EMI/RFI noise filtering	Yes
Emergency Power Off (EPO)	Yes
Power factor	0.9
Noise level	45 dB
Audible alarm(s)	Yes
Output power capacity	1 kVA
Efficiency (On-line mode)	97%
Input frequency	50/60 Hz
Ports & interfaces
Emergency Power Off (EPO) connector	Yes
USB port	Yes
Serial interface	Yes
AC outlets quantity	6 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C14 coupler
USB 2.0 ports quantity	3
RS-232 ports	1
Ethernet LAN (RJ-45) ports	1
Battery
Typical backup time at half load	11.9 min
Typical backup time at full load	3.6 min
Hot-swap battery	Yes
Cold start	Yes
Design
Country of origin	China
Rack capacity	2U
Form factor	Rackmount
LED indicators	Yes
Product colour	Black
Cooling type	Active
Certification	CE, GOST, IEC 62040-1, IEC 62040-2 Class A EMI
Built-in fan	Yes
Housing material	Steel
Display type	LCD
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Technical details
Sustainability certificates	RoHS
Cooling
Cooling type	Active
Built-in fan	Yes
Weight & dimensions
Package width	23.1" (586.7 mm)
Package depth	18.2" (462.3 mm)
Package height	8.5" (215.9 mm)
Weight	34 lbs (15.4 kg)
Width	17.5" (444.5 mm)
Package weight	45.9 lbs (20.8 kg)
Height	3.5" (88.9 mm)
Depth	13.5" (342.9 mm)
Packaging data
Rack mount kit	Yes
Manual	Yes
Cables included	Input power cable, Output power cable, Serial, USB cable
Package width	23.1" (586.7 mm)
Package depth	18.2" (462.3 mm)
Package height	8.5" (215.9 mm)
Package weight	45.9 lbs (20.8 kg)
Logistics data
Products per master (outer) case	1 pc(s)
Certificates
Certification	CE, GOST, IEC 62040-1, IEC 62040-2 Class A EMI
Packaging content
Rack mount kit	Yes
Manual	Yes
Cables included	Input power cable, Output power cable, Serial, USB cable