SMART1000RM2UL - Tripp Lite SMARTPRO UPS, LITHIUM BATTERY BACKUP - 120V 1KVA LINE INTERACTIVE, 2U, SINE WAVE

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight. 120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown. Automatic Voltage Regulation (AVR) Conserves Battery Power With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V–147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed. 6 Outlets Protect Your Mission-Critical Rack Equipment Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. High Efficiency Helps the Environment and Your Cash Flow Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs. Advanced Communications Ports Connect to Any Workstation or Server USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite’s free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency. Optional Network Management Cards Allow Detailed Monitoring of Conditions The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions. Multi-Function LCD and Audible Alarms Keep You Informed The front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions. The LCD screen rotates for easy viewing in rack-mount or tower configuration. Versatile Installation Options Hardware is included for mounting the Tripp Lite SmartPro UPS system in 2U of space in an EIA-standard 19-inch 4-post rack. Use the 2POSTRMKITWM (sold separately) for 2-post rack mounting or wall mounting or the UPSHDEARKIT (sold separately) for 2-post front-mount installation. Use the 2-9USTAND (sold separately) for mounting in an upright tower position. A 10-foot power cord with NEMA 5-15P plug connects the SMART1000RM2UL to a compatible AC power source. Typical Applications - Deliver regulated sine wave output to connected equipment in a network closet or small-business network - Protect point-of-sale and VoIP networks against power surges and spikes - Keep your server room operational during short power failures and allow time for safe shutdowns during longer blackouts - Back up servers, network storage devices, telecom hardware and other applications where long battery lifespan is critical - Provide high-level power protection with a low-maintenance design Package Includes - SMART1000RM2UL SmartPro UPS, Lithium Battery Backup - USB cable - DB9 cable - EPO cable - Rack-mounting hardware - Owner’s manual

 

Specification:

 

Power
Output frequency	60 Hz
Output voltage regulation	-21 - 8%
Output frequency regulation	60 Hz
Output power	800 W
Input operation voltage (min)	110 V
Input operation voltage (max)	120 V
Output operation voltage (min)	110 V
Output operation voltage (max)	120 V
Surge energy rating	570 J
Maximum current	15 A
Efficiency	95%
Emergency Power Off (EPO)	Yes
Power factor	0.8
Output power capacity	1 kVA
Input frequency	60 Hz
Ports & interfaces
Cable length	118.1" (3 m)
AC outlets quantity	6 AC outlet(s)
AC outlet types	NEMA 5–15R
Power plug	NEMA 5-15P
USB 2.0 ports quantity	2
Serial ports quantity	1
Modem (RJ-11) ports	1
Performance
UPS topology	Line-Interactive
Waveform	Sine
EMI/RFI noise filtering	Yes
Surge protection	Yes
Noise level	45.5 dB
Audible alarm(s)	Yes
Features
Output frequency	60 Hz
Country of origin	China
UPS topology	Line-Interactive
Waveform	Sine
Output voltage regulation	-21 - 8%
Output frequency regulation	60 Hz
Output power	800 W
Input operation voltage (min)	110 V
Input operation voltage (max)	120 V
Output operation voltage (min)	110 V
Output operation voltage (max)	120 V
Surge energy rating	570 J
Maximum current	15 A
Efficiency	95%
EMI/RFI noise filtering	Yes
Surge protection	Yes
Emergency Power Off (EPO)	Yes
Power factor	0.8
Noise level	45.5 dB
Audible alarm(s)	Yes
Output power capacity	1 kVA
Input frequency	60 Hz
Battery
Battery voltage	24 V
Battery recharge time	4 h
Typical backup time at half load	15 min
Typical backup time at full load	5.3 min
Hot-swap battery	Yes
Cold start	Yes
Design
Country of origin	China
Rack capacity	2U
Form factor	Rackmount
Product colour	Black
Certification	UL1778, CSA, NOM, FCC
Cable length	118.1" (3 m)
Display type	LCD
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	5 - 95%
Storage relative humidity (H-H)	5 - 95%
Technical details
Output frequency	60 Hz
Sustainability certificates	RoHS
Weight & dimensions
Package width	18.6" (472.4 mm)
Package depth	22.9" (581.7 mm)
Package height	8.8" (223.5 mm)
Weight	35.5 lbs (16.1 kg)
Width	17.4" (440.7 mm)
Package weight	42.5 lbs (19.3 kg)
Height	3.45" (87.6 mm)
Depth	12.5" (317.5 mm)
Packaging data
Rack mount kit	Yes
Manual	Yes
Package width	18.6" (472.4 mm)
Package depth	22.9" (581.7 mm)
Package height	8.8" (223.5 mm)
Package weight	42.5 lbs (19.3 kg)
Logistics data
Products per master (outer) case	1 pc(s)
Certificates
Certification	UL1778, CSA, NOM, FCC
Packaging content
Rack mount kit	Yes
Manual	Yes