Tripp Lite's SMART 2200NET intelligent, line interactive large tower UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 27 minutes half load runtime and 11 minutes fully loaded. Runtime is expandable with optional BP24V28-2U (limit 1) and BP24V70-3U external battery packs. 2200VA/1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications. Includes 6 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS monitoring via 2 built in contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in audible alarm and front panel LEDs indicate line power, battery power, battery charge level, load level, plus voltage regulation status. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. - SMART 2200NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression - 2200VA/1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices - Large internal batteries offer runtimes of 27 minutes at half load (1100VA/850 watts) and 11 minutes at full load (2200VA/1700 watts) - Runtime is further expandable with optional external BP24V28-2U (limit 1) and BP24V70-3U (multi-pack compatible) battery packs - Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V - Includes 6 fully protected NEMA 5-15R outlets with 2 single outlet load banks that can be individually powered off and back on again via software interface - PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running user defined script commands - Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the monitoring of any number of additional servers over IP with included PowerAlert monitoring software - In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity - Supports activate self-test and UPS output power control for delayed or immediate reboot of connected equipment - Diagnostic LEDs (indicate 17 performance conditions)
Specification:
Power |
---|
Output voltage regulation | -13 / +5% |
Output power | 2400 W |
Input operation voltage (min) | 87 V |
Input operation voltage (max) | 140 V |
Output operation voltage (min) | 120 V |
Surge energy rating | 480 J |
Maximum current | 22 A |
Efficiency | 99% |
Power factor | 0.8 |
Output power capacity | 3 kVA |
Input frequency | 60 Hz |
Ports & interfaces |
---|
Cable length | 94.5" (2.4 m) |
AC outlets quantity | 8 AC outlet(s) |
AC outlet types | NEMA 5–15R, NEMA 5–20R |
Power plug | NEMA L5-30P |
Serial ports quantity | 3 |
RS-232 ports | 1 |
Battery |
---|
Battery type | BP24V28-2U, BP24V70-3U |
Battery recharge time | 9 h |
Typical backup time at half load | 23 min |
Typical backup time at full load | 7 min |
Cold start | Yes |
Performance |
---|
UPS topology | Line-Interactive |
Waveform | Sine |
Automatic Voltage Regulation (AVR) | Yes |
Number of input phases | 1 |
LED indicators | Yes |
EMI/RFI noise filtering | Yes |
Power protection features | Over power, Under voltage |
Audible alarm(s) | Yes |
Features |
---|
UPS topology | Line-Interactive |
Waveform | Sine |
Output voltage regulation | -13 / +5% |
Automatic Voltage Regulation (AVR) | Yes |
Number of input phases | 1 |
Output power | 2400 W |
Input operation voltage (min) | 87 V |
Input operation voltage (max) | 140 V |
Output operation voltage (min) | 120 V |
Surge energy rating | 480 J |
Maximum current | 22 A |
Efficiency | 99% |
EMI/RFI noise filtering | Yes |
Power protection features | Over power, Under voltage |
Power factor | 0.8 |
Audible alarm(s) | Yes |
Output power capacity | 3 kVA |
Input frequency | 60 Hz |
Design |
---|
Form factor | Tower |
LED indicators | Yes |
Product colour | Black |
Cooling type | Active |
Certification | FCC, CSA, NOM, UL1778 |
Cable length | 94.5" (2.4 m) |
Housing material | Polyvinyl chloride (PVC) |
Operational conditions |
---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 50 °C |
Operating relative humidity (H-H) | 0 - 95% |
Technical details |
---|
Sustainability certificates | RoHS |
Cooling |
---|
Cooling type | Active |
Weight & dimensions |
---|
Package width | 12.8" (324 mm) |
Package depth | 16.5" (419 mm) |
Package height | 22.2" (565 mm) |
Weight | 89.1 lbs (40.4 kg) |
Width | 9.02" (229 mm) |
Package weight | 96.1 lbs (43.6 kg) |
Height | 17" (432 mm) |
Depth | 12.5" (318 mm) |
Packaging data |
---|
Package width | 12.8" (324 mm) |
Package depth | 16.5" (419 mm) |
Package height | 22.2" (565 mm) |
Package weight | 96.1 lbs (43.6 kg) |
Certificates |
---|
Certification | FCC, CSA, NOM, UL1778 |
Other features |
---|
Battery type | BP24V28-2U, BP24V70-3U |