RV3012OEM - Tripp Lite RV INVERTER / CHARGER 3000W 12V DC / 120V 35A/240A 120V HARDWIRE

Tripp Lite's RV3012OEM Inverter/Charger is the quiet alternative to gas generators with no fumes, fuel or noise to deal with! It provides equipment with utility- or generator-supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged RV applications. Supplies up to 3000 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost TM inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, selectable 35/140 amp charging system. Includes optional dual-circuit hardwire AC input to enable full charger output from circuit 1 with a 120V 20A input and full AC pass-through from circuit 2 with a second 120V 20A input feed. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.

 

Specification:

 

Ethernet LAN features
Ethernet LAN data rates	10,100,1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN	Yes
Network
Network address translation (NAT)	Yes
Concurrent connections	20000
Networking standards	IEEE 802.3,IEEE 802.3u
Ethernet LAN data rates	10,100,1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
Performance
Concurrent connections	20000
Firmware upgradeable	Yes
WAN connection
Ethernet WAN	Yes
Management features
Firmware upgradeable	Yes
Web-based management	Yes
Quality of Service (QoS) support	Yes
Ports & interfaces
USB ports quantity	2
USB version	2.0
Ethernet LAN (RJ-45) ports	4
DC-in jack	Yes
Protocols
Routing protocols	RIP-1,RIP-2
Management protocols	SNMPv1/v2c/v3, Bonjour
Supported network protocols	IPv4, IPv6, Static IP, PPPoE, PPTP, DNS, DynDNS
DMZ support	Yes
DHCP server	Yes
DHCP client	Yes
Technical details
On/off switch	Yes
Rack mounting	No
Firmware upgradeable	Yes
LED indicators	Activity, LAN, Link, Power, USB, WAN
Product colour	Black
Security
Network address translation (NAT)	Yes
URL filtering	Yes
Firewall	Yes
Firewall security	Port Address Translation (PAT) firewall, Stateful packet inspection (SPI) firewall, Network address translation (NAT) firewall
Authentication method	SHA-1, MD5
Security algorithms	3DES,128-bit AES,192-bit AES,256-bit AES,DES,HTTPS,MD5,SHA-1,SSL/TLS
VPN tunnels quantity	25
System event log	Yes
VPN support	IPsec, L2TP, DPD, DNS
Features
Certification	FCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Design
On/off switch	Yes
Rack mounting	No
LED indicators	Activity, LAN, Link, Power, USB, WAN
Product colour	Black
Power
Power source type	DC
Output voltage	12 V
Input current	1.5 A
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	0 - 70 °C
Operating relative humidity (H-H)	10 - 85%
Storage relative humidity (H-H)	5 - 90%
Weight & dimensions
Width	8.11" (206 mm)
Depth	5.2" (132 mm)
Height	1.73" (44 mm)
Packaging data
Quick start guide	Yes
Manual	Yes
Certificates
Certification	FCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Packaging content
Quick start guide	Yes
Manual	Yes