POEINJ1G - StarTech.com SUPPLY POWER AND DATA CONNECTIVITY TO AN INDIVIDUAL GIGABIT POE DEVICE OVER STAN

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.). The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. Convenience and cost savings This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn’t available. Easy to set up in mixed environments You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that’s perfect for installing on walls or under a desk, but it’s also palm-sized, for use on desktop surfaces. Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow. Intelligent power allocation Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device. The POEINJ1G is backed by a StarTech.com 2-year warranty and free lifetime technical support.

 

Specification:

 

Performance
Jumbo frames support	Yes
Duplex system	Full
International Protection (IP) code	IP30
Ethernet LAN data rates	10,100,1000 Mbit/s
Type	Network repeater
Maximum transfer distance	3937" (100 m)
Power over Ethernet (PoE)	Yes
Data transfer rate	1000 Mbit/s
Chipset	Microsemi PD69204
Mean time between failures (MTBF)	540891 h
Auto MDIX IEEE	Yes
Auto-negotiation	Yes
Technical details
Jumbo frames support	Yes
Duplex system	Full
International Protection (IP) code	IP30
Ethernet LAN data rates	10,100,1000 Mbit/s
LED indicators	Yes
Type	Network repeater
Maximum transfer distance	3937" (100 m)
Power over Ethernet (PoE)	Yes
Data transfer rate	1000 Mbit/s
Chipset	Microsemi PD69204
Auto MDIX IEEE	Yes
Auto-negotiation	Yes
Sustainability certificates	CE, RoHS
Harmonized System (HS) code	85176990
Network
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u
Ports & interfaces
Power over Ethernet (PoE) ports quantity	2
Terminal block port	Yes
Design
Housing material	Aluminum
LED indicators	Yes
Certification	CE, FCC, UL
Product colour	Black
Power
Power plug type	Type N
Power over Ethernet (PoE) voltage range	48 - 56 V
Power over Ethernet (PoE)	Yes
Total Power over Ethernet (PoE) budget	90 W
Operational conditions
Operating temperature (T-T)	-40 - 75 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95%
Weight & dimensions
Width	1.26" (32 mm)
Depth	3.23" (82 mm)
Height	4.09" (104 mm)
Weight	6.14 oz (174 g)
Colour
Product colour	Black
Endurance
Mean time between failures (MTBF)	540891 h
Certificates
Certification	CE, FCC, UL
Management features
Supported network protocols (IPv4)	CSMA/CD
Packaging content
Quick start guide	Yes
Packaging data
Package width	8.31" (211 mm)
Package depth	6.38" (162 mm)
Package height	2.52" (64 mm)
Package weight	14.7 oz (416 g)
Logistics data
Master (outer) case width	14" (355 mm)
Master (outer) case length	13.6" (345 mm)
Master (outer) case height	8.86" (225 mm)
Products per master (outer) case	10 pc(s)