Sidebar Sidebar Sidebar

PNM-9022V - Hanwha WN7 PANORAMIC MULTI-SENSOR CAMERA, 180 VIEW, (2MP X 4 SENSORS) 7.3MP @ 30FPS, PA

Write a Review
$2,537.73
$1,409.85
(You save $1,127.88 )

Have questions?

Adding to cart… The item has been added
SKU: PNM-9022V
Availability: In Stock
Weight: 7.05 LBS
Shipping: Calculated at Checkout
IK code: IK10
Minimum illumination: 0.01 lx
Tilt angle range: 0 - 60°
Pan range: 0 - 355°
White balance: ATW AWC Indoor Manual Outdoor
Lens viewing angle horizontal: 209°
Lens viewing angle vertical: 83.3°
Number of effective pixels (H x V): 4096 x 1800 pixels
Maximum aperture number: 2
Fixed focal length: 0.11 (2.8 mm)
Night vision: Yes
Noise reduction: Yes
Privacy masking: Yes
Flip & mirror: Yes
Gain control type: Auto/Manual
Highlight Compensation (HLC): Yes
Back Light Compensation (BLC): Yes
Maximum resolution: 4096 x 1800 pixels
Frame rate: 30 fps
Video streaming: Yes
Total megapixels: 2 MP
Voice codecs: G.711 G.711u G.726
Audio detection: Yes
Bluetooth: No
Ethernet interface type: Gigabit Ethernet
Networking standards: IEEE 802.3at
Number of users: 20 user(s)
Streaming method: Multicast Unicast
Ethernet LAN: Yes
Wi-Fi: No
Supported network protocols: TCP/IP UDP/IP RTP(UDP) RTP(TCP) RTCP RTSP NTP HTTP HTTPS SSL/TLS DHCP PPPoE FTP SMTP ICMP IGMP SNMPv1/v2c/v3(MIB-2) ARP DNS DDNS QoS PIM-SM UPnP Bonjour
Maximum memory card size: 1024 GB
Card reader integrated: Yes
Compatible memory cards: SD SDHC SDXC
Ethernet LAN (RJ-45) ports: 1
Video motion detection: Yes
IP address filtering: Yes
Power source type: PoE
Operating temperature (T-T): -40 - 55 °C
Storage temperature (T-T): -40 - 60 °C
Height: 6.5 (165 mm)
Diameter: 9.96 (25.3 cm)
Number of cameras: 1
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
Covers wide area & supports 8.3MP stitching image PNM-9022V provides panoramic image with 4 3MP multi-sensors. and up to 8.3MP stitching image. It offers both 180˚ and 209˚ mode, allowing users to monitor wide area with a single camera. Installation made easier again PNM-9022V adopted same structure of PNM-9030V. Simply hang the camera body on the hinge first, then push it to the plate till the clip clicks and holds the camera body. Now your hands are free!

Customers Also Viewed