PDUMNH20HVAT - Tripp Lite PDU MONITORED HORIZONTAL 3.3/3.8KW 208/240V ATS L6-20R L6-20P 1U

High-capacity 3.3/3.8kW PDU with ATS provides remote power monitoring and enables redundant power for non-redundant hardware. Digital display and Ethernet interface monitor load levels to prevent overloads that cause downtime. - Two single-phase L6-20P inputs with 10 ft. cords - L6-20R outlet for connecting single device or 0U vertical PDU - Automatic transfer switching within 1–5 ms - Ethernet network interface for remote access - Digital display for real-time status monitoring The PDUMNH20HVAT 3.3/3.8kW Single-Phase 208/240V ATS/Monitored PDU provides remote power monitoring and enables redundant power for network devices with non-redundant power supply configurations. Ideal for data centers and server rooms, it mounts in 1U of space in EIA-standard 19-inch racks and features one L6-20R outlet—perfect for connecting a single device or a 0U 208/240V PDU with an L6-20P plug. Dual 10-foot input cords with L6-20P plugs connect to separate primary and secondary single-phase power sources. The PDU constantly evaluates the power quality of both input sources. Dynamic solid-state (TRIAC) automatic transfer switching allows the PDU to switch to the secondary source within 1–5 milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption. Built-in Ethernet network interface allows remote access to the PDU for power monitoring, configuration, control and notifications via web browser, SSH, telnet or SNMP. Provides real-time load/current data with billing-grade accuracy (+/- 1 percent). Tiered access privileges allow both an administrator and a guest to log in. Automated alerts help prevent accidental overloads, power loss and downtime. Digital display indicates power availability, voltage, source A/B input status, output load and power factor, as well as temperature and humidity conditions with the optional ENVIROSENSE module (sold separately). Primary and Secondary Inputs for Power Redundancy - Provides remote power monitoring and enables redundant power for network devices with non-redundant power supply configurations - Dual 10 ft. input cords with L6-20P plugs connect to separate primary and secondary single-phase power sources - Fault-tolerant, hot-swappable UPS protection when used with single UPS; fully redundant UPS protection when each cord is connected to separate UPS systems Built-In L6-20R Outlet Connects a single device or indirectly powers equipment through a 0U 208/240V PDU with L6-20P input (sold separately) Automatic Transfer Switching (ATS) - Dynamic solid-state (TRIAC) automatic transfer switching - Switches to secondary power source if primary source fails or becomes unstable - 1–5 ms transfer time ensures uninterrupted operation of connected equipment - Built-in processor prevents switching if secondary source is unavailable or of lower quality than primary source Multifunction Digital Display - Reports source A and source B input power status and other information, including power availability, line voltage, frequency, amps, kilowatts and power factor Advanced Network Monitoring - Built-in Ethernet network interface allows full remote access for power monitoring, configuration, control and notifications via web browser, SSH, telnet or SNMP - Real-time load/current data with billing-grade accuracy (+/- 1 percent) - Automated alerts help prevent overloads, power loss and downtime - Optional ENVIROSENSE module (sold separately) monitors temperature and humidity Broad Communications Compatibility - Supports HTTP, HTTPS, PowerAlert®, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and NTP - 10/100 Mbps auto-sensing allows optimal communication with 10/100 Base-T networks Mounts Horizontally in 1U of Rack Space - Compatible with EIA-standard 19 in. 4-post racks and rack enclosures - Optional PDU4PKIT rail kit (sold separately) adds rear mounting support

 

Specification:

 

Design
On/off switch	Yes
Type	Single-phase
PDU types	Metered, Monitored
Mounting	Horizontal
Display	LCD
Product colour	Black
Rack capacity	1U
Ports & interfaces
USB ports quantity	2
AC outlets quantity	10 AC outlet(s)
AC outlet types	C13 coupler, C19 coupler
Power plug	C20 coupler
Serial ports quantity	1
Ethernet LAN (RJ-45) ports	1
Features
Cable length	144.1" (3.66 m)
LED indicators	Yes
Management features
Monitoring	Current, Voltage
Ergonomics
Cable length	144.1" (3.66 m)
LED indicators	Yes
Display	LCD
Power
Maximum power	3840 W
Nominal input voltage	208 - 240 V
Output voltage	200 - 240 V
Maximum current	20 A
AC input frequency	50/60 Hz
Weight & dimensions
Weight	10.3 lbs (4.69 kg)
Width	17.3" (440.2 mm)
Depth	14.8" (375.2 mm)
Height	1.72" (43.7 mm)
Package width	20.8" (528.3 mm)
Package depth	23.4" (594.4 mm)
Package height	5.4" (137.2 mm)
Package weight	17 lbs (7.71 kg)
Packaging data
Package width	20.8" (528.3 mm)
Package depth	23.4" (594.4 mm)
Package height	5.4" (137.2 mm)
Package weight	17 lbs (7.71 kg)
Operational conditions
Storage temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95%
Technical details
Sustainability compliance	Yes
Sustainability certificates	CE, RoHS
Logistics data
Products per master (outer) case	1 pc(s)
Country of origin	Taiwan