PDUMH30HVAT - Tripp Lite PDU METERED ATS 208V / 240V 30A 16 C13; 2 C19; 1 L6-30R TAA

Tripp Lite Metered ATS / Auto Transfer Switch PDU systems enable redundant power configurations for network devices with a single input cord connection. Set of two ATS inputs support connection to separate PRIMARY and SECONDARY power sources. The ATS normally maintains continuous output to connected equipment derived from the primary input. If the primary input fails or becomes unstable, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources to support a variety of advanced redundant power networking applications. Enables fault-tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time, similar to Tripp Lite SmartOnline series. ATS configurations utilizing separate mains circuits, backup generators and even out-of-phase power sources are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front panel current meter offers selectable 4 segment voltage, amperage and kilowatt loading information. - 208V 30A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 24A continuous) - Provides a redundant power option for critical networking equipment with a single input power cord - Digital display with selection button reports voltage, amperage and kilowatt loading information in four output segments (Segment 1: 8 C13 & 1 C19 outlets / Segment 2: 8 C13 & 1 C19 outlets / Segment 3: L6-30R outlet / Segment 4: total output of all outlets combined) - 19 built-in outlets (16 C13, 2 C19, 1 L6-30R) - Set of two 10 ft. / 3m NEMA L6-30P input cables support connection to separate PRIMARY and SECONDARY power sources - ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output as sourced from the secondary input cable until power on the primary input is restored and stable - ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a 2 UPS environment, the primary input must be connected to an online double conversion UPS similar to Tripp Lite SmartOnline series) - Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported - On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source - Super-fast switchover between primary and secondary power sources occurs in 1-5 milliseconds - Front panel LEDs confirm power availability on both input lines - TAA Compliant Version Available - Order Tripp Lite PDUMH30HVATAA

 

Specification:

 

Design
PDU types	Switched
Mounting	Horizontal
Product colour	Black
Certification	UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico)
Rack capacity	2U
Housing material	Metal
Ports & interfaces
AC outlets quantity	19 AC outlet(s)
AC outlet types	C13 coupler, C19 coupler, NEMA L6-30R
Power plug	NEMA L6-30P
Features
Cable length	118.1" (3 m)
LED indicators	Yes
Certification	UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico)
Ergonomics
Cable length	118.1" (3 m)
LED indicators	Yes
Power
Nominal input voltage	208 V
Nominal output voltage	208 V
Maximum current	30 A
AC input frequency	60 Hz
Weight & dimensions
Dimensions (WxDxH)	17.5 x 12.5 x 3.46" (445 x 318 x 88 mm)
Weight	13.7 lbs (6.21 kg)
Width	17.5" (444.5 mm)
Depth	12.5" (317.5 mm)
Height	3.5" (88.9 mm)
Package width	16.8" (426.7 mm)
Package depth	19.9" (505.5 mm)
Package height	7.8" (198.1 mm)
Package weight	19.4 lbs (8.8 kg)
Packaging data
Package width	16.8" (426.7 mm)
Package depth	19.9" (505.5 mm)
Package height	7.8" (198.1 mm)
Package weight	19.4 lbs (8.8 kg)
Operational conditions
Storage temperature (T-T)	-15 - 50 °C
Operating altitude	0 - 118110.2" (0 - 3000 m)
Technical details
Sustainability certificates	RoHS
Logistics data
Products per master (outer) case	1 pc(s)
Country of origin	Taiwan