NPOE-EXT-2X1G30 - Tripp Lite 2-PORT GIGABIT ETHERNET POE+ EXTENDER/REPEATER - CAT5E/6/6A, 95W, IP67, IK10, 32

Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 400 Meters This dual-port extender/repeater allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and two remote PoE devices an extra 328 feet (100 meters). In addition, by cascading as many as three NPOE-EXT-2X1G30 extenders, you can extend that connection as far as 1,312 feet (400 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328 feet each. Saves You Time and Money on Unnecessary Equipment Updates The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power per port using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation. Supports Power over Ethernet to Save You Money and Give You More Installation Choices Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE devices against short circuits and overloads. IP67 Rating Denotes Resistance to Dust, Sand and Water The IP67 rating means the aluminum housing is 100% protected against dust and sand. The housing can also endure immersion in one meter of water for up to 30 minutes, as well as water spray from all directions, such as from a nozzle, with no damage or decline in performance. IK10 Rating Denotes Resistance to Vandalism The IK10 rating (the strongest IK rating) means the aluminum housing is vandal-resistant up to 20 joules – the equivalent of dropping an 11-pound weight on the extender from a distance of 15 inches. Simple Plug-and-Play Installation Has Your Device Connected in Minutes No configuration or software is required to add the NPOE-EXT-2X1G30 to your LAN. Just connect your switch or network jack and your PoE/PoE+ devices to the shielded Power + Data ports using existing Cat5e/6/6a cable. A green LED indicates the unit is receiving a signal and is ready to transmit data and power. Designed for Installation Almost Anywhere Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The silver aluminum housing is compact enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

 

Specification:

 

Network
Networking standards	IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Ethernet LAN data rates	1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Features
Wall mountable	Yes
Product colour	Black
Networking standards	IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Rack mounting	Yes
Country of origin	Taiwan
LED indicators	Yes
Power
Total Power over Ethernet (PoE) budget	60 W
Input voltage	24 - 57 V
Input frequency	50/60 Hz
Technical details
Package width	9.17" (232.9 mm)
Package height	2.44" (62 mm)
Operating temperature (T-T)	-49 - 167 °F
Input voltage	24 - 57 V
Input frequency	50/60 Hz
Ethernet LAN data rates	1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Sustainability compliance	Yes
Sustainability certificates	CE, REACH, RoHS
Master (outer) case GTIN (EAN/UPC)	10037332265910
Operational conditions
Storage temperature (T-T)	-40 - 85 °C
Storage relative humidity (H-H)	5 - 95%
Operating temperature (T-T)	-49 - 167 °F
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95%
Weight & dimensions
Package weight	13.1 oz (370 g)
Package depth	7.2" (182.9 mm)
Package width	9.17" (232.9 mm)
Package height	2.44" (62 mm)
Width	0.984" (25 mm)
Depth	3.94" (100 mm)
Height	4.57" (116 mm)
Packaging data
Package weight	13.1 oz (370 g)
Package depth	7.2" (182.9 mm)
Package width	9.17" (232.9 mm)
Package height	2.44" (62 mm)
Indication
LED indicators	Yes
Logistics data
Master (outer) case width	15.1" (384 mm)
Master (outer) case length	13.1" (334 mm)
Master (outer) case height	10.2" (260.1 mm)
Master (outer) case gross weight	9.92 lbs (4.5 kg)
Products per master (outer) case	10 pc(s)