NPOE-EXT-1G30WP - Tripp Lite GIGABIT ETHERNET POE POE+ EXTENDER, WATER RESISTANT - CAT5E 6 6A, IP65, IEEE 802

Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 500 Meters This single-port connector allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and a remote PoE device an extra 328.08-ft. (100 m). In addition, by cascading as many as four NPOE-EXT-1G30 extenders, you can extend that connection as far as 1640 feet (500 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328.08-ft. (100 m) each. Saves You Time and Money on Unnecessary Equipment Updates The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation. Supports Power over Ethernet to Save You Money and Give You More Installation Choices Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE device against short circuits and overloads. IP65 Rating Denotes Resistance to Dust and Water The IP65 rating means the aluminum housing is not only 100% protected against dust, but also able to endure water spray, such as from a nozzle, from all directions. This makes the NPOE-EXT-1G30WP ideally suited to outdoor use. Simple Plug-and-Play Installation Has Your Device Connected in Minutes No configuration or software is required to add the NPOE-EXT-1G30WP to your LAN. Just connect your switch or network jack and your PoE/PoE+ device to the shielded RJ45 Power + Data ports using existing Cat5e/6/6a cable. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The silver aluminum housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

 

Specification:

 

Network
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Power over Ethernet (PoE)	Yes
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Cable types supported	Cat5e, Cat6, Cat6a
Features
Wall mountable	Yes
Product colour	Gray
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Country of origin	China
Certification	RoHS, REACH, CE, FCC, WEEE
International Protection (IP) code	IP67
Ports & interfaces
Ethernet LAN (RJ-45) ports	3
RJ-45 input ports	1
RJ-45 output ports	2
Power
Power over Ethernet (PoE) power per port	30 W
Technical details
Package width	9.45" (240 mm)
Package height	3.31" (84.1 mm)
Power over Ethernet (PoE)	Yes
Operating temperature (T-T)	-4 - 140 °F
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Sustainability certificates	RoHS
Operational conditions
Storage temperature (T-T)	-40 - 80 °C
Storage relative humidity (H-H)	5 - 90%
Operating temperature (T-T)	-4 - 140 °F
Operating temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	10 - 90%
Weight & dimensions
Package weight	14.8 oz (420 g)
Package depth	7.32" (185.9 mm)
Package width	9.45" (240 mm)
Package height	3.31" (84.1 mm)
Weight	14.8 oz (420 g)
Width	5.93" (150.5 mm)
Depth	2.87" (73 mm)
Height	1.72" (43.8 mm)
Packaging data
Package weight	14.8 oz (420 g)
Package depth	7.32" (185.9 mm)
Package width	9.45" (240 mm)
Package height	3.31" (84.1 mm)
Packaging content
Quick installation guide	Yes
Manual	Yes
Certificates
Certification	RoHS, REACH, CE, FCC, WEEE
Logistics data
Master (outer) case width	17.7" (450.1 mm)
Master (outer) case length	15.4" (389.9 mm)
Master (outer) case height	10.4" (263.9 mm)
Master (outer) case gross weight	14.8 lbs (6.7 kg)