N785-I01-SFP-D - Tripp Lite INDUSTRIAL GIGABIT FIBER TO ETHERNET MEDIA CONVERTER RJ45/SFP

Customize a Network Extension over Fiber Optic Cable This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Line Loop Back (LLB) functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The LLB diagnostic test ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20–57VDC terminal block provides primary and secondary power inputs. Protective Metal Housing Built to Withstand a Variety of Hazards The IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule Purchases The N785-I01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Network
Fiber optic connector	SFP
Auto-negotiation	Yes
Cable types supported	Cat5, Cat5e, Cat6, Cat6a, Fiber
Networking standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Auto MDI/MDI-X	Yes
Maximum data transfer rate	1000 Mbit/s
Technical details
Housing material	Metal
Fiber mode structure	Multi-mode, Single-mode
Internal	No
Master (outer) case GTIN (EAN/UPC)	10037332268591
Performance
Auto-negotiation	Yes
Wavelength-division multiplexing (WDM)	Yes
Fiber mode structure	Multi-mode, Single-mode
Ports & interfaces
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Fiber ports quantity	1
Fiber optic connector	SFP
DC-in jack	Yes
Terminal block included	Yes
Indication
LED indicators	Yes
Design
DIN rail mounting	Yes
Country of origin	Taiwan
Housing material	Metal
LED indicators	Yes
Product colour	Black
Certification	CE, FCC, RoHS
Internal	No
Power
Input voltage	12 - 57 V
Power consumption (typical)	6 W
Packaging content
Package type	Box
Colour
Product colour	Black
Weight & dimensions
Width	1.67" (42.5 mm)
Depth	2.36" (60 mm)
Weight	6.7 oz (190 g)
Height	1.97" (50 mm)
Package depth	5.04" (128 mm)
Package width	9.33" (237 mm)
Package height	2.44" (62 mm)
Package weight	10.6 oz (300 g)
Operational conditions
Operating temperature (T-T)	-40 - 75 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	10 - 95%
Storage relative humidity (H-H)	5 - 95%
Packaging data
Package type	Box
Package depth	5.04" (128 mm)
Package width	9.33" (237 mm)
Package height	2.44" (62 mm)
Package weight	10.6 oz (300 g)
Certificates
Certification	CE, FCC, RoHS
Logistics data
Master (outer) case width	10.7" (272 mm)
Master (outer) case length	19.4" (492 mm)
Master (outer) case height	13.5" (343.9 mm)
Master (outer) case gross weight	15.4 lbs (7 kg)
Products per master (outer) case	20 pc(s)