N785-H01-SFP-D - Tripp Lite HARDENED COPPER TO FIBER MEDIA CONVERTER RJ45/SFP DC POWER

Customize a Network Connection Extension over Fiber Optic Cable This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Line Loop Back Determine the health of your network connection via the Line Loop Back (LLB) function, which ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20–57VDC terminal block provides primary and secondary power inputs. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule Purchases The N785-H01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Network
Fiber optic connector	SFP
Auto-negotiation	Yes
Cable types supported	Cat5, Cat5e, Cat6, Cat6a, Fiber
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Auto MDI/MDI-X	Yes
Maximum data transfer rate	1000 Mbit/s
Technical details
Housing material	Metal
Fiber mode structure	Multi-mode, Single-mode
Internal	No
Master (outer) case GTIN (EAN/UPC)	10037332268584
Performance
Auto-negotiation	Yes
Wavelength-division multiplexing (WDM)	Yes
Fiber mode structure	Multi-mode, Single-mode
Ports & interfaces
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Fiber ports quantity	1
Fiber optic connector	SFP
Terminal block included	Yes
Indication
LED indicators	Yes
Design
DIN rail mounting	Yes
Country of origin	Taiwan
Housing material	Metal
LED indicators	Yes
Product colour	Black
Certification	CE, FCC, RoHS
Internal	No
Power
Input voltage	20 - 57 V
Power consumption (typical)	6 W
Packaging content
Package type	Box
Quick installation guide	Yes
Colour
Product colour	Black
Weight & dimensions
Width	1.81" (46 mm)
Depth	3.82" (97 mm)
Weight	14.8 oz (420 g)
Height	0.551" (14 mm)
Package depth	7.2" (182.9 mm)
Package width	9.17" (232.9 mm)
Package height	2.44" (62 mm)
Package weight	21.2 oz (600 g)
Operational conditions
Operating temperature (T-T)	-40 - 75 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	10 - 95%
Storage relative humidity (H-H)	5 - 95%
Packaging data
Package type	Box
Package depth	7.2" (182.9 mm)
Package width	9.17" (232.9 mm)
Package height	2.44" (62 mm)
Package weight	21.2 oz (600 g)
Certificates
Certification	CE, FCC, RoHS
Logistics data
Master (outer) case width	13.1" (334 mm)
Master (outer) case length	15.1" (384 mm)
Master (outer) case height	10.2" (260.1 mm)
Master (outer) case gross weight	15.4 lbs (7 kg)
Products per master (outer) case	10 pc(s)