N784-H01-STMM - Tripp Lite HARDENED COPPER TO FIBER MEDIA CONVERTER RJ45/ST MMF 10/100MBPS

Extends a Network Connection up to 2 km over ST Multimode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-STMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite’s N785-CH12 Chassis House and power up to 12 Tripp Lite media converters, including the N784-H01-STMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule Purchases The N784-H01-STMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Network
Fiber optic connector	LC
Converter input interface	1000Base-T
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Duplex system	Full, Half
Auto MDI/MDI-X	Yes
Maximum data transfer rate	1000 Mbit/s
Technical details
Wavelength	850 nm
Maximum transfer distance	21653.5" (550 m)
Fiber mode structure	Multi-mode
Internal	No
Sustainability certificates	RoHS
Master (outer) case GTIN (EAN/UPC)	10037332183924
Ports & interfaces
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Fiber optic connector	LC
DC-in jack	Yes
Performance
Wavelength	850 nm
Maximum transfer distance	21653.5" (550 m)
Fiber mode structure	Multi-mode
Design
Country of origin	China
Product colour	Black
Internal	No
Power
Input voltage	100 - 240 V
Output voltage	5 V
Output current	1.2 A
AC input frequency	50 - 60 Hz
Colour
Product colour	Black
Packaging data
Package depth	2.76" (70.1 mm)
Package width	1.02" (25.9 mm)
Package height	3.7" (94 mm)
Package weight	15.2 oz (430 g)
Weight & dimensions
Package depth	2.76" (70.1 mm)
Package width	1.02" (25.9 mm)
Package height	3.7" (94 mm)
Package weight	15.2 oz (430 g)
Logistics data
Master (outer) case width	10" (254 mm)
Master (outer) case length	10.8" (275.1 mm)
Master (outer) case height	12" (305.1 mm)
Master (outer) case gross weight	9.92 lbs (4.5 kg)
Products per master (outer) case	10 pc(s)