MS390-48P-HW - Cisco MERAKI MS390 48GE L3 POE+ SWITCH

Name: MS390-48P-HW - Cisco MERAKI MS390 48GE L3 POE+ SWITCH
Brand: Cisco
SKU: MS390-48P-HW
Price: 9163.5 USD
Availability: InStock
Rating: 4.5 (10 reviews)

Write a Review

$16,494.30

$9,163.50

(You save $7,330.80 )

Current Stock:

Quantity:

Have questions?

302-499-3996

BULK QUOTE

Adding to cart… The item has been added

SKU: MS390-48P-HW

Availability: In Stock

Weight: 16.70 LBS

Shipping: Calculated at Checkout

Multicast support: Yes

Switch type: Managed

System event log: Yes

Quality of Service (QoS) support: Yes

Switch layer: L3

IGMP snooping: Yes

Networking standards: IEEE 802.11ax

VLAN support: Yes

Spanning tree protocol: Yes

Port mirroring: Yes

Number of VLANs: 4094

Link aggregation: Yes

IP routing: Yes

Flow control support: Yes

Broadcast storm control: Yes

Auto-negotiation: Yes

MAC address table: 32000 entries

Switching capacity: 256 Gbit/s

Jumbo frames support: Yes

Static route: Yes

Forwarding rate: 190.48 Mpps

IPv4 & IPv6 features: IPv4/IPv6 access-control list (ACL)

Stackable: Yes

Physical stacking (units): 8

Mean time between failures (MTBF): 277770 h

Harmonized System (HS) code: 85176990

Form factor: 1U

Product colour: White

Rack mounting: Yes

Basic switching RJ-45 Ethernet ports quantity: 48

Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)

Loop protection: Yes

BPDU filtering/protection: Yes

Security algorithms: 802.1x RADIUS

Access Control List (ACL): Yes

Authentication type: RADIUS

DHCP features: DHCP relay

Routing protocols: VRRP

Certification: FCC Part 15 (CFR 47) Class A

Number of fans: 3 fan(s)

Power consumption (max): 555 W

Power supply included: Yes

AC input voltage: 100 - 240 V

AC input frequency: 50 - 60 Hz

Power consumption (typical): 92.6 W

Total Power over Ethernet (PoE) budget: 437 W

Power over Ethernet (PoE): Yes

Power over Ethernet (PoE) type supported: PoE+

Operating temperature (T-T): -5 - 45 °C

Operating relative humidity (H-H): 5 - 90%

Width: 17.5 (445 mm)"

Depth: 17.7 (449 mm)"

Height: 1.73 (44 mm)"

Rack mount kit: Yes

Quick start guide: Yes

Description

Description

OverviewThe Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks. The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides Adaptive Policy using an overthe-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications. Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group’s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes. By pooling & distributing power across MS390s using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.