Sidebar Sidebar Sidebar
LPS535A-SFP - Black Box GIGABIT ETHERNET (1000-MBPS) POE+ MEDIA CONVERTER - 10/100/1000-MBPS COPPER TO 1
LPS535A-SFP - Black Box GIGABIT ETHERNET (1000-MBPS) POE+ MEDIA CONVERTER - 10/100/1000-MBPS COPPER TO 1

LPS535A-SFP - Black Box GIGABIT ETHERNET (1000-MBPS) POE+ MEDIA CONVERTER - 10/100/1000-MBPS COPPER TO 1

Write a Review
$460.28
$255.71
(You save $204.57 )

Have questions?

302-499-3996

BULK QUOTE
Adding to cart… The item has been added
SKU: LPS535A-SFP
Availability: In Stock
Weight: 1.00 LBS
Shipping: Calculated at Checkout
Copper ethernet cabling technology: 10BASE-T, 100BASE-TX, 1000BASE-LX, 1000BASE-SX, 1000BASE-T
Fiber ethernet cabling technology: 1000BASE-X
Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3z
Duplex system: Full
Auto MDI/MDI-X: Yes
Maximum data transfer rate: 1000 Mbit/s
Connectivity technology: Wired
Ethernet LAN (RJ-45) ports: 1
DC-in jack: Yes
Power consumption (max): 33 W
Power over Ethernet (PoE): Yes
Total Power over Ethernet (PoE) budget: 30 W
Input voltage: 100 - 240 V
Input current: 0.8 A
Output voltage: 48 V
Output current: 0.8 A
AC input frequency: 50 - 60 Hz
Width: 2.91 (74 mm)"
Depth: 4.02 (102 mm)"
Height: 0.866 (22 mm)"
Operating temperature (T-T): 0 - 45 °C
Storage temperature (T-T): -20 - 85 °C
Operating relative humidity (H-H): 10 - 90%
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
Description  
DETAILS- Acts as power sourcing equipment (PSE) on the copper side to provide up to 30 watts of power.- Smart, plug-and-play installation. Add devices to your network without any reconfiguration.- The copper port supports full-duplex, auto-MDI/MDI-X, and auto-negotiation.- Link Loss Forwarding provides instant notification of fiber segment link problems.- Compatible with 802.3 aF/at standard PoE devicesTransparently connect fiber to copper to power PoE+ devices at the edge of your network. Use the Converter to connect PoE+ devices such as PTZ (pan, tilt, zoom) cameras, 802.11n access points, VoIP phones, and more that require up to 30 watts of power. The Converter acts as a Power Sourcing Equipment (PSE) to push data and power over copper cable to the remote, Powered Devices (PDs). The Media Converter features one autosensing 10/100/1000-BASE-T UTP port plus an SFP port that can be used for multimode and single-mode 1000BASE-X fiber connections. It is powered via an external AC adapter, which delivers 47~57 input power voltage. The Converter features advanced functions such as auto-negotiation, Auto-MDIX, Link Lost Forwarding, and Link Fault Pass-Through for easy system management and troubleshooting. LEDs indicate Converter activity.

Customers Also Viewed

!