LGC5210A - Black Box GIGABIT ETHERNET (1000-MBPS) POE+ MEDIA CONVERTER - (2) 10/100/1000-MBPS COPPER

Quick Facts Features two 10-/100-/1000-Mbps copper ports and one SFP port that can be customized to the interface of your choice through the use of standard SFPs. Both UTP ports are auto-sensing with auto MDI/MDI-X; one UTP port supports 802.11at PoE+. Rugged metal chassis. Further Details Acts as power sourcing equipment (PSE) on the copper side to power PoE+ devices. Features an extended temperature range when used with DC terminal-block power. This tough media converter is the ideal way extend your network over fiber and also power a PoE device. Use it to link to faraway PoE devices such as IP security cameras, wireless access points, and VoIP phones. The media converter features two autosensing 10/100/1000 UTP ports plus an SFP port that can be customized to virtually any interface—including multimode fiber, single-mode fiber, or Gigabit copper—through the use of a standard SFP. One UTP port supports 802.3at Power over Ethernet, enabling it to power a PoE+ PD device; the other is a straightforward Ethernet port, which can be used for network expansion. The Gigabit PoE+ Media Converter can be powered three ways: from an AC power supply (LGC5210-PS, included), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of +32 to +158° F (0 to +70° C). The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately).