The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide. The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC 60268-5 continuous pink noise (6 dB crest factor); Frequency response, 55 Hz - 20 kHz (-10 dB from rated sensitivity); Sensitivity, 89 dB at one watt, 100 Hz - 10 kHz at one meter; Impedance, 8 Ohm nominal, 6.5 Ohm minimum. The loudspeaker shall have a transformer suitable for use on 70 V or 100 V distributed lines. The transformer shall have taps ranging from 7.5 W to 60 W, plus an 8 Ohm bypass, selectable using a switch on the rear of the enclosure. The 8 Ohm bypass selection shall be protected by a safety screw. The high-frequency transducer shall drive a waveguide to cover evenly 90° horizontally by 90° vertically. The finish shall be black (RAL 9004) or white (RAL 9003). The grille shall be marine grade aluminum. The loudspeaker shall be adjustable over a range of 90° vertically, using a U-Bracket. The loudspeaker shall have an included U-Bracket. The U-Bracket shall be marine grade aluminum. Electrical connections shall be through a 4-pin detachable Euroblock connector on the input panel. The loudspeaker should include an IP65 weather cover for the input panel.
Specification:
Loudspeakers |
---|
Speaker type | 2-way |
Speaker placement | Tabletop/bookshelf, Wall-mountable |
Number of drivers | 2 |
Tweeter | Yes |
Woofer | Yes |
Tweeter diameter (imperial) | 0.75" |
Woofer diameter (imperial) | 5.25" |
Tweeter diameter | 0.787" (2 cm) |
Driver diaphragm material | Polypropylene |
Woofer diameter | 5.24" (13.3 cm) |
Number of woofer drivers | 1 |
Number of tweeter drivers | 1 |
Audio output channels | 2.0 channels |
Audio |
---|
Peak Music Power Output (PMPO) | 300 W |
Frequency range | 55 - 20000 Hz |
Impedance | 8 Ω |
Sensitivity | 89 dB |
RMS rated power | 75 W |
Performance |
---|
Suitable for outdoor use | Yes |
Product colour | White |
Housing material | Acrylonitrile butadiene styrene (ABS), Aluminum |
Certification | IEC 60068-2-5, IEC 60068-2-11, IEC 60068-2-42, IEC 60068-2-60, IEC 60529 |
Recommended usage | Universal |
Amplifier |
---|
Amplifier | Built-in |
Ports & interfaces |
---|
Connectivity technology | Wired |
Bluetooth | No |
Binding post | Yes |
Power |
---|
Transformer taps | 7.5,15,30,60 W |
AC input voltage | 70 - 100 V |
Power source type | AC |
Weight & dimensions |
---|
Width | 7.09" (180 mm) |
Depth | 5.91" (150 mm) |
Depth (with stand) | 7.68" (195 mm) |
Height | 10" (255 mm) |
Weight | 7.05 lbs (3.2 kg) |
Packaging data |
---|
Package type | Box |
Packaging content |
---|
Mounting brackets included | Yes |
Stand included | Yes |
Quantity per pack | 2 pc(s) |