Sidebar Sidebar Sidebar

IMC-350-MMST-PS-A - Advantech MINIMC TP-TX/FX-MM1310-ST LFPT

Write a Review
$240.30
$133.50
(You save $106.80 )

Have questions?

Adding to cart… The item has been added
SKU: IMC-350-MMST-PS-A
Availability: In Stock
Weight: 1.00 LBS
Shipping: Calculated at Checkout
Jumbo frames: 1916
Networking standards: IEEE 802.3, IEEE 802.3u
Duplex system: Full
Maximum data transfer rate: 100 Mbit/s
Connectivity technology: Wired
Ethernet LAN (RJ-45) ports: 1
Fiber ports quantity: 1
Input voltage: 100 - 240 V
Input current: 0.3 A
AC input frequency: 50 - 60 Hz
Width: 1.8 (45.7 mm)"
Depth: 3.35 (85.1 mm)"
Height: 0.831 (21.1 mm)"
Operating temperature (T-T): 0 - 50 °C
Storage temperature (T-T): 0 - 50 °C
Operating relative humidity (H-H): 5 - 95%
Operating altitude: 0 - 118110.2 (0 - 3000 m)"
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
The IMC-350 series is the most compact media converters. They can extend the 10 and 100Mbps twisted-pair network segments up to 80km over fiber technology. Supporting both 10/100 auto negotiation on the copper port and also 100Mbps full-duplex on the fiber port, the IMC-350 series serves as media and data rate converter. With a variety of model types in terms of its play-n-plug feature and multiple powering options, the IMC-350 series is easy and convenient for any applications. The IMC-350I series is in industrial grade and can operate in wide temperature. The multiple powering options including IEEE802.3af Power-over-Ethernet standard allow IMC-250I series to function as a power device. Its AC adapter and USB connectivity offer an unsurpassed flexibility for a variety of installation needs. The IMC-350 LFPT series supports Link Fault Pass Through (LFPT) functionality. LFPT is a troubleshooting feature that combines TX LinkLoss (Twisted Pair, copper interface) and FX LinkLoss (Fiber, fiber interface) from both the local and remote IMC Networks media converters, when used in pairs. This feature, when enabled, will pass a link fault through the device at each segment. If a link fails on one interface of the media converter, the media converter will force the link down on its link partner and then forward it to the next interface.

Customers Also Viewed