GTB-UHD600-HBT - Gefen 4K ULTRA HD 600 MHZ HDBASET EXTENDER W/ HDR, RS-232, 2-WAY IR, AND POL

Gefen GTB-UHD600-HBT Extend Full-Bandwidth HDMI 2.0 w/ HDR up to 80 meters/264 feet, over a single CAT-5 The Gefen GTB-UHD600-HBT is a compact and high-performance solution for extending full-bandwidth HDMI 2.0 audio/video with HDR up to 80 meters (264 feet), over a CAT-5e or better cable. It supports 18.2 Gbps of data throughput and 600 MHz TMDS Clock frequency, the highest specified under the HDMI 2.0 standard. This extender uses HDBaseT™ technology along with Gefen’s visually lossless proprietary compression algorithms with very high PSNR (Peak Signal to Noise Ratio), to accommodate resolutions up to 4K Cinema-DCI (4096 x 2160 to 60 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:4:4) with HDR. High Dynamic Range (HDR) delivers greater contrast between light and dark areas of a video image, resulting in tremendous improvement in picture quality and color depth. HDCP 2.2 and the legacy HDCP 1.4 are both supported. The GTB-UHD600-HBT also supports 1080p Full HD, WUXGA (1920 x 1200), 3DTV, and Deep Color (up to 1080p resolution). Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI outputs. The GTB-UHD600-HBT provides RS-232 and 2-way IR extension between the Sender and the Receiver units, facilitating the control of A/V sources placed near the Sender unit and sending automation commands to the display or another device placed near the Receiver unit. Gefen’s Bi-Directional POL (Power Over Line) technology powers the Sender or the Receiver unit using the same cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display. Small, low profile enclosures can be securely surface-mounted and conveniently hidden away from sight, and accommodate Gefen locking HDMI cables for secure connections. - Supports 18.2 Gbps bandwidth and 600 MHz TMDS clock Extends HDMI, RS-232, & Bi-Directional IR over a single CAT-5e/CAT-6A: - 4K Ultra HD (3840 x 2160 to 60 Hz, 4:4:4), up to 264 feet/80 meters (8-bit color) - 4K Cinema (DCI) (4096 x 2160 to 60 Hz 4:4:4), up to 264 feet/80 meters (8-bit color) - 1080p Full HD (60 Hz) and WUXGA (1920 x 1200 to 60 Hz), up to 330 feet/100 meters (up to 12-bit Deep Color) HDMI Features Supported: - HDMI 2.0 (full bandwidth to 18 Gbps/600 MHz) - HDR (High Dynamic Range) 10-bit Deep Color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4 - HDCP 2.2 and 1.4 - 12-bit Deep Color (at 1080p) - Uncompressed LPCM digital audio up to 7.1 channels - HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ - 3DTV pass-through - CEC pass-through - Lip Sync pass-through - Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920x1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (not included) - RS-232 2-way link between Sender and Receiver - IR extension from Sender to Receiver and from Receiver to Sender - Gefen’s Bi-Directional POL provides power to the Sender or the Receiver unit over the link cable - only one side will need external power - Uses Gefen’s implementation of HDBaseT™ technology with proprietary algorithms and enhanced features - Advanced EDID Management - Firmware updatable via RS-232 - Locking power connector - Surface mountable - Plug & Play – no configuration or set-up required for most applications - Compact enclosures are easy to install and can be hidden away