The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 6x4 channel or a 6x4 horizontal tee.
The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 12x4 channel or a 12x4 horizontal tee.
The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 2 inches (50.4 mm) when exiting from the 4x4 channel or a 4x4 horizontal tee.
A 31.5-inch display with UHD resolution, an In-Plane Switching Panel, and 3-side NearEdgeless bezels, makes working on ThinkVision P32p-20 a treat. Experience seamless collaboration in any workspace...
The BRBK-IP10 option board allows the BRC-H900 and BRC-Z330 cameras to be connected to the RM-IP10 remote control panel via LAN cable.Systems of up to 112 cameras under IP control can be built...
The FiberRunner® 6x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV456X4LYL to change the level of a straight...