E1G42ETBLK - Intel GIGABIT DUAL PORT PCI-E NIC

The Intel® Gigabit ET and EF Multi-Port Server Adapters are Intel's third generation of PCIe GbE network adapters. Built with the Intel® 82576 Gigabit Ethernet Controller, these new adapters showcase the next evolution in GbE networking features for the enterprise network and data center. These features include support for multi-core processors and optimization for server virtualization. Features and benefits: - Industry-leading, energy-efficient design for next-generation Gigabit performance and multi-core processors. - Enables higher bandwidth and throughput from standard and low-profile PCI Express slots and servers. - Provides centralized storage area network (SAN) management at a lower cost than competing iSCSI solutions. - Increases performance on multi-processor systems by efficiently balancing network loads across CPU cores when used with Receive-Side Scaling from Microsoft or Scalable I/O on Linux. - Allows each port to operate without interfering with the other - Enables dual- or quad-port operation in almost any PCI Express server slot, except x1 slots. - Enables widespread deployment. - Compliant with the European Union directive 2002/95/EC to reduce the use of hazardous materials. - Provides point-and-click management of individual adapters, advanced adapter features, connection teaming, and virtual local area network (VLAN) configuration.

 

Specification:

 

Ports & interfaces
Internal	Yes
Connector(s)	RJ-45
PCI version	2.0
Ethernet LAN (RJ-45) ports	4
Interface	Ethernet
Host interface	PCI Express
Connectivity technology	Wired
Bandwidth
Supported data transfer rates	10/100/1000 Mbps
Maximum data transfer rate	1000 Mbit/s
Network
Supported data transfer rates	10/100/1000 Mbps
Ethernet LAN	Yes
Maximum operating distance	3937" (100 m)
LAN controller	Intel® 82576
Maximum data transfer rate	1000 Mbit/s
Technical details
Interface type	PCIe v2.0 (2.5 GT/s)
Speed & slot width	2.5 GT/s, x4 Lane
PCI-SIG* SR-IOV Capable	Yes
On-chip QoS and Traffic Management	Yes
Message signal interrupt	Yes
Low halogen options available	No
iWARP/RDMA	No
Intelligent Offloads	Yes
Intel Virtualization Technology for Connectivity (VT-c)	Yes
Intel Virtual Machine Device Queues (VMDq)	Yes
Intel Flexible Port Partitioning	Yes
Intel Ethernet Power Management	No
Storage Over Ethernet	iSCSI, NFS
Harmonized System (HS) code	8517620090
Export Control Classification Number (ECCN)	5A992C
Commodity Classification Automated Tracking System (CCATS)	G135872
Thermal Design Power (TDP)	8.4 W
Product type	Network Interface Card
Number of QPI links	Quad
Status	Launched
Product name	Intel Gigabit ET2 Quad Port Server Adapter
Product brief URL	http://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/gigabit-et-et2-ef-multi-port-server-adapters-brief.html
Network interface card type	Server
Network interface card security	IPSec
Network interface card cable medium	Copper
Market segment	Server
Launch date	Q3'10
Born on date	Q3'10
Last change	63903513
Design
Internal	Yes
Product family	Intel Gigabit server adapter
Product series	Gigabit Ethernet Adapters (1GbE)
Product codename	Portville
System requirements
Compatible operating systems	Windows Server 2012*, Windows 8*, Windows Server 2008 R2*, Windows 7*, Windows Server 2008*, Windows Vista*, Windows Server 2003 R2*, Windows Server 2003*, Linux* Stable Kernel version 3.x, 2.6,x, Red Hat Enterprise Linux* 5, 6, SUSE Linux Enterprise Server* 10, 11, FreeBSD 9*, , VMware ESX/ESXi*
Operational conditions
Operating temperature (T-T)	0 - 55 °C
Storage temperature (T-T)	-40 - 70 °C
Weight & dimensions
Width	2.73" (69.4 mm)
Depth	6.59" (167.4 mm)
Performance
Ethernet adapter ARK ID	49187
Speed & slot width	2.5 GT/s, x4 Lane
PCI-SIG* SR-IOV Capable	Yes
On-chip QoS and Traffic Management	Yes
iWARP/RDMA	No
Intelligent Offloads	Yes
Intel Virtual Machine Device Queues (VMDq)	Yes
Intel Flexible Port Partitioning	Yes
Intel Ethernet Power Management	No
Other features
Compatible operating systems	Windows Server 2012*, Windows 8*, Windows Server 2008 R2*, Windows 7*, Windows Server 2008*, Windows Vista*, Windows Server 2003 R2*, Windows Server 2003*, Linux* Stable Kernel version 3.x, 2.6,x, Red Hat Enterprise Linux* 5, 6, SUSE Linux Enterprise Server* 10, 11, FreeBSD 9*, , VMware ESX/ESXi*
Thermal Design Power (TDP)	8.4 W
Product type	Network Interface Card
Number of QPI links	Quad
Ethernet adapter ARK ID	49187
Interface type	PCIe v2.0 (2.5 GT/s)
Supported data transfer rates	10/100/1000 Mbps
Cable type	Category 5 up to 100m
Speed & slot width	2.5 GT/s, x4 Lane
Ports quantity	4
PCI-SIG* SR-IOV Capable	Yes
On-chip QoS and Traffic Management	Yes
Message signal interrupt	Yes
Low halogen options available	No
iWARP/RDMA	No
Intelligent Offloads	Yes
Intel Virtualization Technology for Connectivity (VT-c)	Yes
Intel Virtual Machine Device Queues (VMDq)	Yes
Intel Flexible Port Partitioning	Yes
Intel Ethernet Power Management	No
Connector(s)	RJ-45
Storage Over Ethernet	iSCSI, NFS
Status	Launched
Product name	Intel Gigabit ET2 Quad Port Server Adapter
Product brief URL	http://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/gigabit-et-et2-ef-multi-port-server-adapters-brief.html
Network interface card type	Server
Network interface card security	IPSec
Network interface card cable medium	Copper
Market segment	Server
Launch date	Q3'10
Born on date	Q3'10
Last change	63903513
Product family	Intel Gigabit server adapter
Product series	Gigabit Ethernet Adapters (1GbE)
Product codename	Portville
Harmonized System (HS) code	8517620090
Export Control Classification Number (ECCN)	5A992C
Commodity Classification Automated Tracking System (CCATS)	G135872
Controller type	Intel 82576
Cabling type	Category 5 up to 100m
Bracket height	Low-Profile (LP) / Full-Height (FH)