DVM21S2T8/8G - Dataram 8GB DDR4-2133 NON-ECC SODIMM CL15 2RX8

DVM21S2T8/8G is an Unbuffered 1Gx64 small – outline memory module, which conforms to JEDEC's DDR4-2133, PC4-2133 standard. The assembly is Dual-Rank. Each rank is comprised eight 512Mbx8 DDR4-2133 SDRAMs. One EEPROM is used for Serial Presence Detect and a combination register/PLL, with Address and Command Parity, is also used. Both output driver strength and input termination impedance are programmable to maintain signal integrity on the I/O signals in a Fly-by topology. A thermal sensor accurately monitors the DIMM module and can prevent exceeding the maximum operating temperature of 95C.- 260-pin JEDEC-compliant DIMM, 69.60 mm wide by 30.00 mm high- Operating Voltage: VDD/VDDQ = 1.2V (1.14V to 1.26V)- VPP = 2.5V (2.375V to 2.75V)- VDDSPD = 2.25V to 2.75V- I/O Type: 1.2 V signaling- On-board I2C temperature sensor with integrated Serial Presence-Detect (SPD) EEPROM- Data Transfer Rate: 17.0 Gigabytes/sec- Data Bursts: 8 and burst chop 4 mode- ZQ Calibration for Output Driver and On-Die Termination (ODT)- Programmable ODT / Dynamic ODT during Writes- Programmable CAS Latency: 9, 10, 11, 12, 13, 14, 15 and 16- Bi-directional Differential Data Strobe signals- Per DRAM Addressability is supported- Write CRC is supported at all speed grades- DBI (Data Bus Inversion) is supported(x8 only)- CA parity (Command/Address Parity) mode is supported- 16 internal banks- SDRAM Addressing (Row/Col/BG/BA): 15/10/2/2- Fully RoHS Compliant