Sidebar Sidebar Sidebar

DPS-500A - D-Link REDUNDANT PWR SUPPLY UNIT, 140 WATT RPSU

Write a Review
$683.59
$379.77
(You save $303.82 )

Have questions?

Adding to cart… The item has been added
SKU: DPS-500A
Availability: In Stock
Weight: 5.63 LBS
Shipping: Calculated at Checkout
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
The DPS-200A, DPS-500A and DPS-700 redundant power supplies (RPS) are designed to conform to the wattage requirements of D-Link’s Fast Ethernet and Gigabit switches. They provide a low-cost, simple solution to the problem of a failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switching device, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the availability of the switching device. Redundant Power Backup Each D-Link® RPS is equipped with an integrated detection circuit that continuously monitors the switching device’s internal power supply. In the event of a power interruption, the redundant power supply is immediately triggered so that the LAN switch and its connected devices can continue providing service. This results in a more reliable network infrastructure and protects the network from a single failure of a network device power supply. Easy and Flexible Deployment Deployment of a DPS-200A, DPS-500A or DPS-700 does not necessitate any change in configuration of the LAN switch. Each RPS is equipped with a universal internal power supply and can be connected to any AC main power source from 90VAC to 264VAC, 47Hz to 63Hz through a standard AC power cable. The DPS-200A and DPS-500A power supplies are modular, and can be mounted on benchtop/desktop as independent power supply units, or installed in a DPS-800 chassis, which holds two power supplies and mounts in a standard 19-inch equipment rack. The DPS-700 is a 1U high 19-inch standard-size rack mount power supply designed specifically for D-Link’s PoE switches. Not only does it provide power backup in the event of a power supply failure in the PoE switch, but it also supports PoE power load sharing. It provides an additional 370W of PoE power budget to the switch to support more powered devices. All D-Link redundant power supplies ship with the necessary cables. The one exception is for the DPS-3000-10TC Gigabit switch when used with the DPS-200A power supply. In this case, a DPS-CB150-2PS cable must be separately ordered. DPS-800 Rack-Mount Chassis Each DPS-800 chassis can accommodate up to two DPS-200A or DPS-500A power supply modules in an equipment rack. The DPS-800 occupies 1.25U of rack space and allows users to save space with efficient cabling. All redundant power supply units installed in the chassis connect directly to their power sources and are hot-swappable. D-Link RPS Compatibility Chart DPS-500A: - DGS-3450 - DGS-3120-48TC - DGS-3420-28TC - DGS-3420-28SC - DGS-3420-52T - DGS-3620-28TC - DGS-3620-28SC - DGS-3620-52T

 

Specification:

 

Features
Product typePower supply
Mean time between failures (MTBF)624961 h
Product colourBlack
Harmonized System (HS) code85177900
Colour
Product colourBlack
Technical details
Mean time between failures (MTBF)624961 h
Height1.73" (44 mm)
Shipping (inner) case width16.7" (42.4 cm)
Shipping (inner) case net weight37 lbs (16.8 kg)
Shipping (inner) case length22.7" (57.7 cm)
Shipping (inner) case height14.8" (37.6 cm)
Products per shipping (inner) case3 pc(s)
Products per pallet (sea)60 pc(s)
Products per pallet (air)36 pc(s)
Pallet gross width39.4" (100 cm)
Pallet gross length47.2" (120 cm)
Pallet height (sea)79.5" (2.02 m)
Pallet height (air)49.7" (126.3 cm)
Pallet gross weight (sea)846.6 lbs (384 kg)
Pallet gross weight (air)525.6 lbs (238.4 kg)
Package width13.5" (344 mm)
Package weight12.3 lbs (5.6 kg)
Package height5.2" (132 mm)
Package depth22" (559 mm)
Master (outer) cases per pallet (sea)20 pc(s)
Master (outer) cases per pallet (air)12 pc(s)
Shipping (inner) case gross weight40.1 lbs (18.2 kg)
Power
AC input voltage90 - 264 V
AC input frequency50 - 60 Hz
Total power589 W
Maximum current7.5 A
Operational conditions
Storage temperature (T-T)-40 - 85 °C
Operating temperature (T-T)0 - 65 °C
Operating relative humidity (H-H)5 - 95%
Weight & dimensions
Weight8.16 lbs (3.7 kg)
Height1.73" (44 mm)
Width17.4" (441 mm)
Depth7.83" (199 mm)

Customers Also Viewed