DIS-200G-12S - D-Link 12-PORT MNGD INDUSTRIAL SWITCH, -40C TO +65C

The DIS-200G-12S Layer 2 Industrial Managed Switch is equipped with 10 10/100/1000BASE-T ports and 2 SFP ports. This switch features a robust design making it ideal for deployment in industrial and outdoor surveillance settings, capable of withstanding the harshest environments. The DIS-200G-12S furthermore integrates advanced management and security functions to provide a complete solution. Durable and Reliable Design The DIS-200G-12S switch is housed in a highly resistant IP30-rated metal casing to protect the switch from harsh environmental conditions. The high electromagnetic compatibility (EMC) protects DIS-200G-12S from unwanted effects when operating in environments with strong electromagnetic interference. Meanwhile, the fanless design extends the life of DIS-200G-12S while also being able to operate in a wider temperature range of up to 65 °C. For increased flexibility, the DIS-200G-12S switch can also be mounted on a DIN rail, wall mounted, or be installed in an equipment rack. Additionally, the DIS-200G-12S switch features 6 kV surge protection on all copper ports to help prevent damage to the switch and connected devices caused by sudden power surges and lightning strikes. The in-built surge protection of up to 6 kV can mitigate the damage to the switch from both indoor and outdoor devices and network connections by absorbing the excess energy while still letting the amount of power through required for the switch to operate normally. This increases network reliability, reduces repair costs, and removes the need for replacement hardware in the event of an electrical surge or lightning strike. High Redundancy and Reliability The DIS-200G-12S switch supports ERPS quick failover recovery for ring topologies that ensures minimal downtime and avoids any loss of data in mission-critical deployment settings. Meanwhile, the dual power input allows for a redundant power supply to make sure the network continues to operate in the event of a primary power supply failure. Surveillance Traffic Optimization The DIS-200G-12S switch supports the Auto Surveillance VLAN feature. This automatically detects surveillance devices and puts them into a dedicated surveillance VLAN, segmenting their traffic from the rest of the network. This provides increased security of surveillance data, and gives the traffic a higher priority through the switch, reducing the chances of the video freezing or being delayed on live streams. A single switch can be used for both surveillance and data networks, removing the need for dedicated surveillance hardware while simultaneously reducing maintenance costs. Easy Troubleshooting The DIS-200G-12S switch features loopback detection and cable diagnostics to help network administrators find and solve network problems quickly and easily. Loopback detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

 

Specification:

 

Management features
Multicast support	Yes
Switch type	Managed
Web-based management	Yes
System event log	Yes
Quality of Service (QoS) support	Yes
Switch layer	L2
Configuring Location Settings (CLI)	Yes
Ports & interfaces
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Basic switching RJ-45 Ethernet ports quantity	10
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity	2
Gigabit Ethernet (copper) ports quantity	10
Console port	RJ-45
Network
IGMP snooping	Yes
Active link detection	Yes
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplex	Yes
VLAN support	Yes
Spanning tree protocol	Yes
Port mirroring	Yes
Number of VLANs	4094
Link aggregation	Yes
Flow control support	Yes
Broadcast storm control	Yes
Auto MDI/MDI-X	Yes
10G support	No
Auto-negotiation	Yes
Virtual LAN features	Port-based VLAN, Tagged VLAN, Voice VLAN
Virtual LAN features
VLAN support	Yes
Number of VLANs	4094
Virtual LAN features	Port-based VLAN, Tagged VLAN, Voice VLAN
Data transmission
Number of VLANs	4094
Jumbo frames	9600
MAC address table	8000 entries
Switching capacity	24 Gbit/s
Store-and-forward	Yes
Jumbo frames support	Yes
Forwarding rate	17.85 Mpps
Performance
Stackable	No
Auto-negotiation	Yes
Mean time between failures (MTBF)	219314 h
Technical details
Product colour	Black
Stackable	No
Mean time between failures (MTBF)	219314 h
Housing material	Metal
Rack mounting	Yes
Security
Authentication	Port-based authentication
Security algorithms	802.1x RADIUS, SSL/TLS
IGMP snooping	Yes
Queue scheduling algorithms	SPQ, Weighted Round Robin (WRR)
Authentication type	RADIUS
DHCP features	DHCP client
Multicast features
Multicast support	Yes
Protocols
Management protocols	SNMP v1/v2c/v3, SNTP, Telnet
Certificates
Certification	CE, FCC, BSMI EN 61000-4-2 ESD EN 61000-4-3 RS EN 61000-4-4 EFT EN 61000-4-5 EN 61000-4-6 CS EN 61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6
Design
Wall mountable	No
International Protection (IP) code	IP30
DIN rail mounting	Yes
Product colour	Black
Stackable	No
LED indicators	Yes
Housing material	Metal
Certification	CE, FCC, BSMI EN 61000-4-2 ESD EN 61000-4-3 RS EN 61000-4-4 EFT EN 61000-4-5 EN 61000-4-6 CS EN 61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6
Rack mounting	Yes
Indication
LED indicators	Yes
Power
Power consumption (max)	10.26 W
DC input voltage	12 - 48 V
Power source	PoE
Power over Ethernet (PoE)
Power over Ethernet (PoE)	No
Operational conditions
Storage temperature (T-T)	-40 - 85 °C
Storage relative humidity (H-H)	0 - 95%
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	0 - 95%
Heat dissipation	35.01 BTU/h
Weight & dimensions
Width	6.74" (171.2 mm)
Depth	2.09" (53 mm)
Height	8.27" (210 mm)
Weight	3.59 lbs (1.63 kg)