Sidebar Sidebar Sidebar

C6ASPAT35BL - StarTech.com CAT6A ETHERNET CABLE DELIVERS 10 GIGABIT CONNECTION FREE OF NOISE & EMI/RFI INTE

Write a Review
$114.01
$63.34
(You save $50.67 )

Have questions?

Adding to cart… The item has been added
SKU: C6ASPAT35BL
Availability: In Stock
Weight: 1.00 LBS
Shipping: Calculated at Checkout
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
Make 10Gb Ethernet connections with PoE support

This 35-foot Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections.

Reliable Cat6a 10 Gigabit connections

Each cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks.

Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amount of EMI.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.

Secured network connections

For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.

Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.

The C6ASPAT35BL is backed by StarTech.com’s lifetime warranty for guaranteed reliability.

The StarTech.com Advantage

- HIGH PERFORMANCE CAT6a Ethernet CABLE: 100% copper for consistent & error-free 10 gigabit connection. Fluke tested complies with ANSI/TIA-568-D Category 6 requirements; ETL Certified Wiring
- PROTECT YOUR NETWORK: Shielded RJ45 connectors minimize Near-End Crosstalk (NEXT) & protect against noise & electromagnetic (EMI/RFI) interference compatible w/ multi-speed 10Base-T/NBASE-T generation
- SPECS: 10 GbE

 

Specification:

 

Technical details
Product colourGray
Plug and PlayYes
Cable standardCat6a
Connector 1RJ-45
Connector 2RJ-45
Cabling technology10GBase-T
Data transfer rate10000 Mbit/s
Jacket materialPolyvinyl chloride (PVC)
Conductor typeStranded
Cable length358.3" (9.1 m)
Cable ratingCMG (CM)
Sustainability certificatesRoHS
Certificates
CertificationCE, REACH
Features
Product colourGray
Cable ratingCMG (CM)
Snagless cable bootYes
Conductor materialCopper
Frequency500 MHz
AWG wire size26
Plug and PlayYes
Cable standardCat6a
Connector 1RJ-45
Connector 2RJ-45
Cabling technology10GBase-T
Data transfer rate10000 Mbit/s
Jacket materialPolyvinyl chloride (PVC)
Conductor typeStranded
CertificationCE, REACH
Cable length358.3" (9.1 m)
Ethernet interface type10 Gigabit Ethernet
Power over Ethernet (PoE)Yes
Harmonized System (HS) code84733080
Connector 2 genderMale
Connector 1 genderMale
Weight & dimensions
Weight14.4 oz (408 g)
Packaging data
Package width10" (255 mm)
Package depth13" (330 mm)
Package height0.394" (10 mm)
Package weight15.4 oz (436 g)
Quantity per pack1 pc(s)
Logistics data
Products per master (outer) case25 pc(s)
Master (outer) case width14.2" (360 mm)
Master (outer) case length15.7" (400 mm)
Master (outer) case height10" (255 mm)

Customers Also Viewed