B156-003-V2 - Tripp Lite 3-PORT DISPLAYPORT MULTI-STREAM TRANSPORT HUB 4KX2K TAA

Displays the same image on 3 DisplayPort monitors, extends the desktop across them, or combines all into one large monitor. Ideal for digital signage in schools, churches, conference rooms, trade shows and retail outlets. - Supports UHD video resolutions up to 3840 x 2160 (4K x 2K) - Built-in 6 in. cable connects directly to DisplayPort source - Supports up to 48-bit Deep Color (16 bits per channel) - Works with all operating systems - Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound - Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed. - MST-compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface of your graphics card. If the total percentage of bandwidth taken up by all the connected monitors exceeds 100%, an image will not display on one or more of them. The B156-003-V2 3-Port DisplayPort 1.2 MST Hub connects up to three DisplayPort monitors to the DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three into one large monitor in video wall mode. The B156-003-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24/30 Hz with the number of 4K monitors limited according to your graphics card’s specifications. In video wall mode, this hub supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration. This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly to a DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B156-003-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Connects Up to 3 DisplayPort Monitors to Your Computer’s DisplayPort Output - Ideal for digital signs in schools, churches, conference rooms, trade shows and retail settings - Displays same image on 3 monitors simultaneously in mirror mode - Extends desktop across 3 monitors in extended mode - Combines 3 monitors into one large monitor in video wall mode - Built-in 6 in. cable connects directly to DisplayPort source - LEDs indicate when monitors are receiving a signal Meets the Latest Performance Standards - Supports UHD video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 Hz - Supports expanded resolutions in video wall mode, such as 5760 x 1080 in horizontal 1 x 3 configuration - Supports HDCP, EDID and DDC - Supports 48-bit Deep Color (16 bits per channel) - Supports DTS-HD, Dolby True HD and 7.1-channel surround sound audio - Backward compatible with DisplayPort 1.1 and 1.1a Easy to Use Almost Anywhere - Works with all operating systems - Plug and play—no software or drivers required TAA Compliant Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases

 

Specification:

 

Ports & interfaces
Video ports quantity	4
Video port type	DisplayPort
Video out	4x HDMI
Connector(s)	DisplayPort 1.2
Cable length	5" (0.127 m)
Features
Dolby technologies	DTS-HD, Dolby TrueHD
Colour depth	48 bit
Supported graphics resolutions	1920 x 1080 (HD 1080), 3840 x 2160
Maximum resolution	3840 x 2160 pixels
Full HD	Yes
HDCP	Yes
Supported video modes	1080i, 1080p
Plug and Play	Yes
Easy to install	Yes
Product colour	Black
Certification	CE, FCC, RoHS, REACH
Cable length	5" (0.127 m)
Country of origin	Taiwan
Power
Input current	0.5 A
Output current	2 A
USB powered	No
Output voltage	5 V
AC input frequency	50 - 60 Hz
AC input voltage	100-240 V
Weight & dimensions
Weight	4.94 oz (140 g)
Dimensions (WxDxH)	4.29 x 3 x 0.945" (109 x 76.2 x 24 mm)
Package weight	14.5 oz (410 g)
Package depth	8.4" (213.4 mm)
Package width	6.2" (157.5 mm)
Package height	2.2" (55.9 mm)
Packaging data
Package weight	14.5 oz (410 g)
Package depth	8.4" (213.4 mm)
Package width	6.2" (157.5 mm)
Package height	2.2" (55.9 mm)
Video
Colour depth	48 bit
Supported graphics resolutions	1920 x 1080 (HD 1080), 3840 x 2160
Maximum resolution	3840 x 2160 pixels
Full HD	Yes
HDCP	Yes
Supported video modes	1080i, 1080p
Colour
Product colour	Black
Certificates
Certification	CE, FCC, RoHS, REACH
Technical details
Dolby technologies	DTS-HD, Dolby TrueHD
Supported audio channels	7.1
Package width	6.2" (157.5 mm)
Package height	2.2" (55.9 mm)
Video out	4x HDMI
Plug and Play	Yes
Easy to install	Yes
Logistics data
Master (outer) case width	6.9" (175.3 mm)
Master (outer) case length	22.5" (571.5 mm)
Master (outer) case height	9.1" (231.1 mm)
Master (outer) case gross weight	8.99 lbs (4.08 kg)
Products per master (outer) case	10 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332193183
Harmonized System (HS) code	8525.50.3035
Country of origin	Taiwan