B140-002-DD - Tripp Lite DVI OVER CAT5 DUAL DISPLAY EXTENDER SPLITTER ACTIVE PASSIVE TAA

Tripp Lite's B140-002-DD takes in two PC DVI source video signals, and splits each to two remote monitors. Passive, non-powered Receivers allow distances up to 15.24 m (50-ft.) @ 1920x1200 resolution, or 30.5 m (100-ft.) @ 1024x768 resolution, over solid conductor Cat6 cable. Active, powered Receivers extend the distance to 45.72 m (150-ft.) @ 1920x1200, and 60.96 m (200-ft.) @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained (up to 3) on each channel, allowing four monitors per channel, by using Tripp Lite B140-110 Repeater/Extender. Tripp Lite recommends Cat6 Solid Conductor patch cables for Digital Extenders (DVI/HDMI). Tripp Lite N202-series patch cables are designed specifically for these types of devices...pre-terminated, Solid Conductor Cat6 patch cables up to 60.96 m (200-ft.) - Split and extend Dual DVI signals from a computer to two sets of Dual Displays - 1920 x 1200 (60Hz) resolution up to 45.72 m (150-ft.) - Up to 4 displays per channel when using repeaters - Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays A B140-Series remote receiver is needed at each monitor - For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to extend a 1920 x 1200 @ 60Hz signal up to 45.72 m (150-ft.) from the transmitter (or a 1024 x 768 @ 60Hz signal up to 60.96 m (200-ft.) from the transmitter) - For shorter distances: Use a B140-1P0 passive receiver to extend a 1920 x 1200 @ 60Hz signal up to 15.24 m (50-ft.) from the transmitter (or a 1024 x 768 @ 60Hz signal up to 30.5 m (100-ft.) from the transmitter) - Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series to achieve maximum distance and resolution - Further expand the range and number of monitors by adding B140-110 remote repeater units - Add up to three repeaters on each of the B140-002-DD channels, for a total of 4 displays per channel (An active receiver should be the last unit in a channel) - A 1920 x 1200 @ 60Hz signal can be extended up to 38.1 m (125-ft.) for each repeater added into a channel (or up to 53.34 m (175-ft.) for a 1024 x 768 @ 60Hz signal) - DVI 1.0 compliant - HDCP compatible Mounting hardware included that allows the unit to be wall-mounted, rackmounted, or pole mounted - Plug and play; no software or drivers required - Compatible with all operating systemsInternational AC Adapter B110-INT required for use with UK, European, and Australian power connections

 

Specification:

 

Ports & interfaces
Video ports quantity	2
Video port type	DVI
Ethernet LAN (RJ-45) ports	4
Ethernet LAN	Yes
Features
Supported graphics resolutions	1024 x 768 (XGA)
Maximum resolution	1920 x 1080 pixels
HDCP	Yes
Power LED	Yes
Plug and Play	Yes
Product colour	Black
Country of origin	Taiwan
Network
Ethernet LAN	Yes
Power
Output voltage	5 V
AC input frequency	50 - 60 Hz
AC input voltage	100-240 V
Packaging data
Package weight	28.9 oz (820 g)
Package depth	6.4" (162.6 mm)
Package width	10.1" (256.5 mm)
Package height	2.1" (53.3 mm)
Packaging content
Manual	Yes
Video
Supported graphics resolutions	1024 x 768 (XGA)
Maximum resolution	1920 x 1080 pixels
HDCP	Yes
Colour
Product colour	Black
Indication
Power LED	Yes
Technical details
Package width	10.1" (256.5 mm)
Package height	2.1" (53.3 mm)
Plug and Play	Yes
Weight & dimensions
Package weight	28.9 oz (820 g)
Package depth	6.4" (162.6 mm)
Package width	10.1" (256.5 mm)
Package height	2.1" (53.3 mm)
Logistics data
Master (outer) case width	22.3" (566.4 mm)
Master (outer) case length	10.8" (274.3 mm)
Master (outer) case height	7" (177.8 mm)
Master (outer) case gross weight	17.7 lbs (8.03 kg)
Products per master (outer) case	10 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332156690
Harmonized System (HS) code	8525.50.3035
Country of origin	Taiwan