B127A-2A1-BHBH - Tripp Lite HDMI OVER CAT6 EXTENDER KIT TRANSMITTER/

Dual-Output Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Extends a 4K A/V Transmission up to 230 ft....or More The B127A-2A1-BHBH extends 4K signals from an HDMI source device to two HDMI displays up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters). Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color The B127A-2A1-BHBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with 7.1-channel surround sound audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the transmitter or receiver over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the unit where needed without worrying about finding a nearby AC outlet. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver work right out of the package with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Then, connect the receiver to the displays with user-supplied HDMI cables. Finally, connect the two units with user-supplied Cat6 cable (such as Tripp Lite N202-Series). TAA-Compliant for GSA Schedule Purchases The B127A-2A1-BHBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Features
Material	Metal
Colour depth	36 bit
Audio output channels	7.1 channels
Wall mountable	Yes
Consumer Electronics Control (CEC) support	Yes
3D	Yes
Maximum refresh rate	60 Hz
Certification	CE, FCC, CCC, GS, TUV, UL, cUL, REACH,RoHS
Type	AV transmitter
Maximum resolution	3840 x 2160 pixels
Cable types supported	Cat5, Cat6
Maximum transfer distance	2755.9" (70 m)
Audio system	Multichannel
Supported video modes	3840p
Supported graphics resolutions	3840 x 2160
LED indicators	Yes
Cable length	54.3" (1.38 m)
Product colour	White
Extended display identification data (EDID)	Yes
Ports & interfaces
Remote (IR) output	1
Remote (IR) input	1
RJ-45 input ports	1
RJ-45 output ports	1
Number of HDMI outputs	2
DC-in jack	Yes
Connectivity technology	Wired
Digital audio optical out	1
Power
Input current	0.6 A
Output current	1 A
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Operating voltage	24 V
Operational conditions
Operating relative humidity (H-H)	0 - 85%
Storage temperature (T-T)	-15 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Weight & dimensions
Receiver weight	16 oz (453.6 g)
Transmitter weight	16 oz (453.6 g)
Transmitter dimensions (WxDxH)	2.76 x 1.34 x 4.53" (70 x 34 x 115 mm)
Receiver dimensions (WxDxH)	2.76 x 1.34 x 4.53" (70 x 34 x 115 mm)
Packaging data
Package depth	6.46" (164.1 mm)
Package width	10.2" (260.1 mm)
Package height	2.17" (55.1 mm)
Package weight	15.9 oz (450 g)
Packaging content
Mounting kit	Yes
AC adapter included	Yes
Manual	Yes
Included power plug types	AU, EU, NA, UK
Technical details
Country of origin	Taiwan
Sustainability compliance	Yes
Sustainability certificates	CE, REACH, RoHS
Logistics data
Master (outer) case width	22.6" (573 mm)
Master (outer) case length	10.7" (273 mm)
Master (outer) case height	6.89" (175 mm)
Master (outer) case gross weight	17.4 lbs (7.9 kg)
Products per master (outer) case	10 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332261035