Sidebar Sidebar Sidebar

B127A-1A1-BDFH - Tripp Lite DISPLAYPORT TO HDMI OVER CAT6 EXTENDER K

Write a Review
$407.00
$226.11
(You save $180.89 )

Have questions?

Adding to cart… The item has been added
SKU: B127A-1A1-BDFH
Availability: In Stock
Weight: 2.27 LBS
Shipping: Calculated at Checkout
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
Cat6 Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor. Extends a 4K A/V Transmission up to 230 ft....or Even Farther The B127A-1A1-BDFH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters). Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color The B127A-1A1-BDFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 7.1-channel surround sound. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks After you connect the included external power supply to the transmitter, Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet. Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then, connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite’s P569-XXX-CERT or P568-XXX-2A). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units. TAA-Compliant for GSA Schedule Purchases The B127A-1A1-BDFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Features
MaterialMetal
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
3DYes
Maximum refresh rate60 Hz
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance2759.8" (70.1 m)
Audio systemMultichannel
LED indicatorsYes
Product colourBlack
Extended display identification data (EDID)Yes
Ports & interfaces
Remote (IR) output2
Remote (IR) input2
USB ports quantity3
USB version1.1
USB connector typeMicro-USB, USB Type-A
RJ-45 input ports1
RJ-45 output ports1
HDMI in1
Number of HDMI outputs2
DC-in jackYes
Connectivity technologyWired
Digital audio optical out1
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Operating voltage24 V
Operational conditions
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Receiver weight15.9 oz (450 g)
Transmitter weight15.9 oz (450 g)
Transmitter dimensions (WxDxH)4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Receiver dimensions (WxDxH)4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Packaging data
Package depth6.46" (164.1 mm)
Package width10.2" (260.1 mm)
Package height2.17" (55.1 mm)
Package weight23.3 oz (660 g)
Packaging content
Mounting kitYes
Cables includedIR
AC adapter includedYes
ManualYes
Included power plug typesAU, EU, NA, UK
Technical details
Country of originTaiwan
Sustainability complianceYes
Sustainability certificatesCE, REACH, RoHS
Logistics data
Master (outer) case width22.6" (573 mm)
Master (outer) case length10.7" (273 mm)
Master (outer) case height6.89" (175 mm)
Master (outer) case gross weight15.2 lbs (6.9 kg)
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332258622

Customers Also Viewed