Sidebar Sidebar Sidebar

B127A-1A1-BDBH - Tripp Lite DISPLAYPORT HDMI OVER CAT6 EXTENDER KIT

Write a Review
$460.33
$255.74
(You save $204.59 )

Have questions?

Adding to cart… The item has been added
SKU: B127A-1A1-BDBH
Availability: In Stock
Weight: 1.23 LBS
Shipping: Calculated at Checkout
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Extends a 4K A/V Transmission up to 230 ft. The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively. Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display. Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet. Dip Switch Extends Your Choice of Either USB or IR. The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). TAA-Compliant for GSA Schedule Purchases The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Features
MaterialMetal
HDCPYes
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
3DYes
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance2759.8" (70.1 m)
Audio systemMultichannel
Supported video modes720p, 1080p, 2160p
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
LED indicatorsYes
Cable length54.3" (1.38 m)
Product colourBlack, White
Extended display identification data (EDID)Yes
HDCP version1.4/2.2
Ports & interfaces
DisplayPorts in1
Ethernet LANYes
RJ-45 input ports1
RJ-45 output ports1
HDMI in1
Number of HDMI outputs1
HDMI version2.0
DC-in jackYes
Connectivity technologyWired
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Operating voltage24 V
Operational conditions
Storage relative humidity (H-H)0 - 85%
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Receiver weight22.9 oz (650 g)
Transmitter weight22.9 oz (650 g)
Transmitter dimensions (WxDxH)4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Receiver dimensions (WxDxH)2.76 x 1.33 x 4.53" (70 x 33.8 x 115 mm)
Packaging data
Package typeBox
Package depth6.46" (164.1 mm)
Package width13.9" (352 mm)
Package height2.17" (55.1 mm)
Package weight2.27 lbs (1.03 kg)
Packaging content
Mounting kitYes
AC adapter includedYes
ManualYes
Included power plug typesAU, EU, NA, UK
Technical details
Country of originTaiwan
Sustainability complianceYes
Sustainability certificatesCE, REACH, RoHS
Logistics data
Master (outer) case width23.1" (586 mm)
Master (outer) case length14.8" (374.9 mm)
Master (outer) case height7.76" (197.1 mm)
Master (outer) case gross weight24.5 lbs (11.1 kg)
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332263992

Customers Also Viewed