B127A-110-BD - Tripp Lite DISPLAYPORT OVER CAT6 RECEIVER WITH REPE

DisplayPort 1.2a Extender Transceiver Ideal for Digital Signage in Schools and Restaurants This 4K transceiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Combines with Tripp Lite DisplayPort Extender Kit to Add More Distance The B127A-110-BD works with Tripp Lite’s B127A-111-BDTD extender kit (sold separately) to further extend a 4K audio/video signal up to 230 feet (70.1 meters) with no latency. It connects between the transmitter and receiver from the extender kit with user-supplied Cat6 cabling. Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color The B127A-110-BD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with 7.1-channel surround sound audio through its TOSLINK port. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This receiver also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display. Create a Daisy Chain to Achieve More Distance This transceiver combines with the Tripp Lite B127A-111-BDTD extender kit (sold separately) and additional B127A-110-BD transceivers to form daisy-chain installations up to 920 feet (280.4 meters) from the transmitter. Up to four total transceivers can be chained together, each capable of extending a 4K signal up to 230 feet per unit. In addition to the extender kit, this transceiver is also compatible with Tripp Lite’s B127A-1A1-BDBD and can be used to replace any receivers in the installation as well. Add a Tripp Lite Signal Booster to Achieve, Yes, Even More Distance The receiver is also compatible with Tripp Lite's B127A-010-H signal booster (sold separately), which allows the signal to be boosted up to 400 feet (121.9 meters) total between the transmitter and transceiver. When used in a daisy-chain installation, this brings the total extension distance up to 1,090 ft. (332.2 meters). Note : B127A-010-H will only work when used in the first link of the daisy-chain installation. Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the B127A-110-BD over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet. Power is also equally distributed to any additional receivers within a daisy-chain installation. Plug-and-Play Operation for Quick Setup and Immediate Use The transceiver works right out of the box with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the transceiver to a transmitter and any additional transceivers with user-supplied Cat6 cable (such as Tripp Lite’s N202-Series). Connect to a 4K display with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). TAA-Compliant for GSA Schedule Purchases The B127A-110-BD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Features
Material	Metal
Colour depth	36 bit
Audio output channels	7.1 channels
Wall mountable	Yes
Consumer Electronics Control (CEC) support	Yes
3D	Yes
Maximum refresh rate	60 Hz
Type	AV repeater
Maximum resolution	3840 x 2160 pixels
Cable types supported	Cat5, Cat5e, Cat6, HDMI
Maximum transfer distance	2759.8" (70.1 m)
Audio system	Multichannel
LED indicators	Yes
Cable length	54.3" (1.38 m)
Extended display identification data (EDID)	Yes
Ports & interfaces
Remote (IR) output	1
Remote (IR) input	1
RJ-45 input ports	1
RJ-45 output ports	1
Number of HDMI outputs	1
DC-in jack	Yes
Connectivity technology	Wired
Digital audio optical out	1
Power
Input current	0.6 A
Output current	1 A
AC input voltage	100 - 240 V
AC input frequency	50-60 Hz
Operating voltage	24 V
Operational conditions
Operating relative humidity (H-H)	0 - 85%
Storage temperature (T-T)	-15 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Weight & dimensions
Width	4.53" (115 mm)
Height	1.06" (27 mm)
Depth	2.46" (62.4 mm)
Packaging data
Package depth	6.46" (164.1 mm)
Package width	10.2" (260.1 mm)
Package height	2.17" (55.1 mm)
Package weight	23.3 oz (660 g)
Packaging content
Mounting kit	Yes
AC adapter included	Yes
Manual	Yes
Included power plug types	AU, EU, NA, UK
Technical details
Country of origin	Taiwan
Sustainability compliance	Yes
Sustainability certificates	CE, REACH, RoHS
Logistics data
Master (outer) case width	22.6" (573 mm)
Master (outer) case length	10.7" (273 mm)
Master (outer) case height	6.89" (175 mm)
Master (outer) case gross weight	15.2 lbs (6.9 kg)
Products per master (outer) case	10 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332258608