B127-1A1-CH - Tripp Lite USB-C TO HDMI OVER CAT6 EXTENDER KIT, TRANSMITTER/RECEIVER, PD 3.0, POC, HDR, 4K

USB-C to HDMI Extender for Displaying Video in Boardrooms and Conference Rooms This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-1A1-CH extends 4K video and stereo audio signals from a USB-C source device to an HDMI display up to 125 feet (38 meters) away via user-supplied Cat6 Ethernet cabling. Supports USB DisplayPort Alternate Mode for Converting Audio/Video Signals By connecting a USB-C cable to a source device that supports DisplayPort Alt Mode, you can output 4K video and digital audio to an HDMI monitor, television or projector without installing special software drivers. Transmits Crystal-Clear 4K HDMI Video with HDR and 4:4:4 Color The B127-1A1-CH supports Ultra HD video resolutions up to 4K x 2K (3840 x 2160) at 60 Hz, as specified in HDMI 2.0, with 8-channel LPCM, AC-3 and DTS digital audio. Built-in equalization automatically fine-tunes the image quality at the remote display with no time-consuming manual fiddling needed. The extender is capable of carrying HDR signals, which provide a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. This kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the remote receiver over Cat6 cable. Green and orange LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver away from an AC outlet. PD 3.0 Charging Port Charges the Source Device to Avoid Battery Drain and Signal Loss The USB-C Power Delivery port provides power output up to 20V 3A (60W), which is sufficient wattage for charging and powering the connected source device, such as a MacBook Pro or Windows laptop. Connect the device's power supply or power adapter between the USB-C PD 3.0 port and an available AC outlet to prevent the source from running out of power prematurely. Local HDMI Port Supports Multi-Resolution Technology Connect a display to the transmitter's HDMI port to monitor the image being sent to the remote display. The port allows connection of displays of various resolutions without affecting the 4K at 60 Hz transmission extended to the remote receiver. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source with a USB Type-C cable (such as Tripp Lite's U420-Series) and the receiver to the display with an HDMI cable (Tripp Lite's P568- or P569-Series). Then, connect the two units using Cat6 Ethernet cable (Tripp Lite N202-Series cable). TAA-Compliant for GSA Schedule Purchases The B127-1A1-CH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

Specification:

 

Features
Material	Aluminum
HDCP	Yes
Audio output channels	7.1 channels
Plug and Play	Yes
Consumer Electronics Control (CEC) support	Yes
Maximum refresh rate	30 Hz
Certification	FCC, REACH
Type	AV transmitter & receiver
Maximum resolution	3840 x 2160 pixels
Maximum transfer distance	1181.1" (30 m)
Audio system	Multichannel
Supported video modes	1080p, 2160p
LED indicators	Yes
Product colour	Black
HDCP version	2.2
Ports & interfaces
USB ports quantity	2
Wi-Fi	Yes
USB connector type	Micro-USB B
HDMI in	1
Number of HDMI outputs	1
HDMI version	1.4
DC-in jack	Yes
Connectivity technology	Wireless
Power
Input current	0.2 A
Output current	1 A
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Operating voltage	5 V
Operational conditions
Storage relative humidity (H-H)	0 - 90%
Operating relative humidity (H-H)	0 - 90%
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Packaging data
Package type	Box
Package depth	5.87" (149.1 mm)
Package width	7.83" (198.9 mm)
Package height	3.15" (80 mm)
Package weight	20.1 oz (570 g)
Technical details
Country of origin	China
Sustainability certificates	RoHS
Logistics data
Master (outer) case width	16.7" (424.9 mm)
Master (outer) case length	16.5" (420.1 mm)
Master (outer) case height	12.4" (315 mm)
Master (outer) case gross weight	27.3 lbs (12.4 kg)
Products per master (outer) case	20 pc(s)
Master (outer) case GTIN (EAN/UPC)	10037332239157