Performance
The AT-IFS802SP/POE (W) is a high performance and cost-effective industrial managed switch that meet the high
reliability requirements of industrial network operations.
The industrial switch provides a network manager some key features using the simple web-based management function
such as; port-based VLANs, IEEE 802.1p Qos, port trunking/link aggregation, port mirroring, priority queues and IEEE
802.1x security support. With support of up to 8k MAC addresses and a 1Mbit packet buffer the AT-IFS802SP/POE (W)
switch is an ideal option for integrating management into your network solution.
Securing the Network Edge
To ensure the protection of your data, it is important to control access to your network. Protocols such as IEEE 802.1x
port-based authentication guarantee that only known users are connected to the network. Unknown users who physically
connect can be isolated to a pre-determined part of your network offering guests such benets as Internet access while ensuring the integrity of your private network data.
Gigabit and Fast Ethernet SFP Support
The SFP Ports support both Gigabit and Fast Ethernet Small Form-factor Performance Pluggables (SFPs). This makes the switch an ideal family for environments where Gigabit ber switches will be phased in over time. This allows for connectivity to the legacy 100FX hardware until it is upgraded to Gigabit. Support for both speeds of SFPs allows organizations to stay within budget as they migrate to faster technologies.
High Network Resiliency
The AT-IFS802SP/POE (W) industrial switch supports the X-Ring protocol that can help the network recover from
connection failure within 20ms, thus making the network system very resilient. The X-Ring algorithm is similar to
spanning tree protocol (STP) algorithm but its recovery time is faster than STP. In addition, Dual Homing and Couple Ring
Topology are also supported to further increase the network availability.
Specification:
Network | |
---|---|
Fiber optic connector | SC |
Store-and-forward | Yes |
Packet forwarding rate (100 Mbps) | 148880 pps |
Packet forwarding rate (10 Mbps) | 14880 pps |
Packet forwarding rate (1 Gbps) | 1488000 pps |
Converter input interface | 10Base-T, 100Base-TX, 1000Base-T |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Ethernet interface type | Gigabit Ethernet |
Converter output interface | 1000Base-SX |
Auto MDI/MDI-X | Yes |
Maximum data transfer rate | 1000 Mbit/s |
Technical details | |
International Protection (IP) code | IP30 |
Wavelength | 850 nm |
Maximum transfer distance | 21653.5" (550 m) |
Fiber mode structure | Multi-mode |
Tx power (min) | -9.5 dBmW |
Tx power (max) | -4 dBmW |
Rx power (min) | -17 dBmW |
Rx power (max) | -3 dBmW |
Internal | No |
Sustainability certificates | RoHS |
Harmonized System (HS) code | 85176990 |
Performance | |
Store-and-forward | Yes |
Wavelength | 850 nm |
Maximum transfer distance | 21653.5" (550 m) |
Fiber mode structure | Multi-mode |
Tx power (min) | -9.5 dBmW |
Tx power (max) | -4 dBmW |
Rx power (min) | -17 dBmW |
Rx power (max) | -3 dBmW |
Ports & interfaces | |
Connectivity technology | Wired |
Ethernet LAN (RJ-45) ports | 1 |
Fiber ports quantity | 1 |
Fiber optic connector | SC |
Indication | |
LED indicators | Yes |
Design | |
International Protection (IP) code | IP30 |
Safety | UL 62368-1, EN 62368-1, UL 60950-1 (UL), CAN/CSA C22.2 No. 60950-1 (cUL), EN 60950-1 (TUV) |
LED indicators | Yes |
Product colour | Gray |
Certification | TAA FCC A, EN55024, EN55032, EN55035, VCCI A |
Internal | No |
Colour | |
Product colour | Gray |
Weight & dimensions | |
Width | 4.37" (111 mm) |
Depth | 3.78" (96 mm) |
Weight | 26.4 oz (748 g) |
Height | 1.38" (35 mm) |
Operational conditions | |
Operating temperature (T-T) | -40 - 75 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 95% |
Operating altitude | 0 - 120000" (0 - 3048 m) |
Certificates | |
Safety | UL 62368-1, EN 62368-1, UL 60950-1 (UL), CAN/CSA C22.2 No. 60950-1 (cUL), EN 60950-1 (TUV) |
Certification | TAA FCC A, EN55024, EN55032, EN55035, VCCI A |