AT-IE210L-18GP-60 - Allied Telesis INDUSTRIAL MANAGED POE+ SWITCH, 16 X 10/100/1000TX POE+ PORTS AND 2 X 100/1000X

The Allied Telesis IE210L Series of Industrial-Lite Ethernet Gigabit Layer 2 switches are built for enduring performance at high ambient temperatures, making them ideal for indoor IoT applications and physical security. The Allied Telesis IE210L Series are wire-speed Layer 2 switches for industrial-lite Ethernet applications. With Power over Ethernet Plus (PoE+), and support for high operating temperatures of up to 65°C, IE210L switches tolerate the harsh and demanding environments found in industrial deployments. These high-performing, cost-effective switches provide network managers with several key features, including port-based VLANs, IEEE 802.1p, QoS, port trunking/link aggregation, port mirroring, priority queues, and IEEE 802.1x security support. With support for up to 16K MAC addresses, the IE210L Series is the ideal option for integrating management into any network solution. Device management is provided via an industry-standard CLI, web-based Graphical User Interface (GUI), SNMP, Telnet and SSH, as well as the Allied Telesis Autonomous Management Framework™ (AMF). Powerful network management AMF meets the increased management requirements of modern converged networks, automating many everyday tasks including configuration management. AMF has powerful centralized management features that manage a complete network as a single virtual device. The network can be expanded with plug-and-play simplicity, and network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third-party devices, such as security cameras, to be part of an AMF network. Secure Network security is guaranteed, with powerful control over network traffic types, secure management options, and other multi-layered security features built right into the IE210L. Network Access Control (NAC) gives unprecedented control over user access to the network, in order to mitigate threats to network infrastructure. Allied Telesis IE210L switches use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security policies and either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users and devices, while secure access is also available for guests. Security from malicious network attacks is provided by a comprehensive range of features, such as DHCP snooping, STP root guard, BPDU protection and Access Control Lists (ACLs). Each of these can be configured to perform a variety of actions upon detection of a suspected attack. Network protection Advanced storm protection features include bandwidth limiting, policy-based storm protection and packet storm protection. Network storms are often caused by cabling errors that result in a network loop. IE210L switches provide features to detect loops as soon as they are created. Loop detection and thrash limiting take immediate action to prevent network storms. Network resiliency The convergence of network services in the Enterprise has led to increasing demand for highly-available networks with minimal downtime. The IE210L Series supports highly-stable and reliable network switching with a recovery time of less than 50ms. You can customize the IE210L with the most appropriate mechanism and protocol to prevent network connection failure. Choices include Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standard ITU-T G.8032. Future-proof The IE210L switches are Software-Defined Networking (SDN) ready and are able to support OpenFlow v1.3.

 

Specification:

 

Management features
Multicast support	Yes
Traffic shaping	Yes
Traffic classification	Yes
ARP inspection	Yes
Switch type	Managed
Web-based management	Yes
System event log	Yes
Quality of Service (QoS) support	Yes
Switch layer	L3
Configuring Location Settings (CLI)	Yes
Network
IGMP snooping	Yes
Networking standards	IEEE 1588, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.2, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplex	Yes
VLAN support	Yes
Spanning tree protocol	Yes
Port mirroring	Yes
Number of VLANs	4094
Link aggregation	Yes
Flow control support	Yes
Broadcast storm control	Yes
10G support	No
Policy-based routing	Yes
Virtual LAN features	Private VLAN, Tagged VLAN
Virtual LAN features
VLAN support	Yes
Number of VLANs	4094
Virtual LAN features	Private VLAN, Tagged VLAN
Data transmission
Number of VLANs	4094
Jumbo frames	9000
Packet buffer memory	1.5 MB
MAC address table	16000 entries
Switching capacity	24 Gbit/s
Number of queues	8
Jumbo frames support	Yes
Forwarding rate	17.8 Mpps
Performance
Packet buffer memory	1.5 MB
Stackable	No
Memory type	DDR-SDRAM
Internal memory	512 MB
Flash memory	128 MB
Harmonized System (HS) code	85176990
Export Control Classification Number (ECCN)	5A992C
Fanless	Yes
Technical details
Product colour	Gray
Stackable	No
Housing material	Aluminum, Metal
Rack mounting	No
Ports & interfaces
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
USB 2.0 ports quantity	1
Console port	RJ-45
Security
BPDU filtering/protection	Yes
Authentication	Guest VLAN, MAC-based authentication, Port-based authentication, Web-based authentication
MAC address filtering	Yes
IGMP snooping	Yes
Access Control List (ACL)	Yes
Password protection	Yes
DHCP features	DHCP relay, DHCP server, DHCP snooping, DHCPv6 relay, DHCPv6 server
Multicast features
Multicast support	Yes
Protocols
Routing protocols	BGP, OSPF, RIP
Certificates
Electromagnetic compatibility	EN 55024, EN 61000-6-2
Certification	CE, FCC, ICES, RCM, TEC8, UL, VCCI RoHS, China-RoHS, WEEE
Memory
Packet buffer memory	1.5 MB
Memory type	DDR-SDRAM
Internal memory	512 MB
Flash memory	128 MB
Design
Wall mountable	Yes
International Protection (IP) code	IP30
DIN rail mounting	Yes
Product colour	Gray
Stackable	No
LED indicators	Yes
Housing material	Aluminum, Metal
Electromagnetic compatibility	EN 55024, EN 61000-6-2
Certification	CE, FCC, ICES, RCM, TEC8, UL, VCCI RoHS, China-RoHS, WEEE
Rack mounting	No
Indication
LED indicators	Yes
Power
Power consumption (max)	271 W
Power supply included	No
Redundant power supply (RPS) support	Yes
DC input voltage	18 - 57 V
Power over Ethernet (PoE)
Power over Ethernet (PoE) power per port	30 W
Power over Ethernet plus (PoE+) ports quantity	8
Total Power over Ethernet (PoE) budget	240 W
Power over Ethernet (PoE)	Yes
Operational conditions
Storage temperature (T-T)	-40 - 85 °C
Storage relative humidity (H-H)	5 - 90%
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95%
Operating altitude	0 - 118110.2" (0 - 3000 m)
Heat dissipation	105.8 BTU/h
Weight & dimensions
Width	3.58" (91 mm)
Depth	5.47" (139 mm)
Height	6.02" (153 mm)
Weight	5.16 lbs (2.34 kg)