AT-IE210L-10GP-60 - Allied Telesis INDUSTRIAL MANAGED POE+ SWITCH, 8 X 10/100/1000TX POE+ PORTS AND 2 X 100/1000X S

The Allied Telesis IE210L Series of Industrial-Lite Ethernet Gigabit Layer 2 switches are built for enduring performance at high ambient temperatures, making them ideal for indoor IoT applications and physical security. The Allied Telesis IE210L Series are wire-speed Layer 2 switches for industrial-lite Ethernet applications. With Power over Ethernet Plus (PoE+), and support for high operating temperatures of up to 65°C, IE210L switches tolerate the harsh and demanding environments found in industrial deployments. These high-performing, cost-effective switches provide network managers with several key features, including port-based VLANs, IEEE 802.1p, QoS, port trunking/link aggregation, port mirroring, priority queues, and IEEE 802.1x security support. With support for up to 16K MAC addresses, the IE210L Series is the ideal option for integrating management into any network solution. Device management is provided via an industry-standard CLI, web-based Graphical User Interface (GUI), SNMP, Telnet and SSH, as well as the Allied Telesis Autonomous Management Framework™ (AMF). Powerful network management AMF meets the increased management requirements of modern converged networks, automating many everyday tasks including configuration management. AMF has powerful centralized management features that manage a complete network as a single virtual device. The network can be expanded with plug-and-play simplicity, and network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third-party devices, such as security cameras, to be part of an AMF network. Secure Network security is guaranteed, with powerful control over network traffic types, secure management options, and other multi-layered security features built right into the IE210L. Network Access Control (NAC) gives unprecedented control over user access to the network, in order to mitigate threats to network infrastructure. Allied Telesis IE210L switches use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security policies and either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users and devices, while secure access is also available for guests. Security from malicious network attacks is provided by a comprehensive range of features, such as DHCP snooping, STP root guard, BPDU protection and Access Control Lists (ACLs). Each of these can be configured to perform a variety of actions upon detection of a suspected attack. Network protection Advanced storm protection features include bandwidth limiting, policy-based storm protection and packet storm protection. Network storms are often caused by cabling errors that result in a network loop. IE210L switches provide features to detect loops as soon as they are created. Loop detection and thrash limiting take immediate action to prevent network storms. Network resiliency The convergence of network services in the Enterprise has led to increasing demand for highly-available networks with minimal downtime. The IE210L Series supports highly-stable and reliable network switching with a recovery time of less than 50ms. You can customize the IE210L with the most appropriate mechanism and protocol to prevent network connection failure. Choices include Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standard ITU-T G.8032. Future-proof The IE210L switches are Software-Defined Networking (SDN) ready and are able to support OpenFlow v1.3.

 

Specification:

 

Management features
Multicast support	Yes
Traffic classification	Yes
ARP inspection	Yes
Switch type	Managed
Web-based management	Yes
System event log	Yes
Quality of Service (QoS) support	Yes
MIB support	Comprehensive SNMP
Switch layer	L2
Configuring Location Settings (CLI)	Yes
Ports & interfaces
Copper ethernet cabling technology	10BASE-T, 100BASE-FX, 100BASE-T, 1000BASE-LX, 1000BASE-SX, 1000BASE-T
SFP module slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	16
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity	16
Power connector	AC-in jack
Network
IGMP snooping	Yes
Copper ethernet cabling technology	10BASE-T, 100BASE-FX, 100BASE-T, 1000BASE-LX, 1000BASE-SX, 1000BASE-T
Networking standards	IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1v, IEEE 802.2, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplex	Yes
VLAN support	Yes
Spanning tree protocol	Yes
Port mirroring	Yes
Number of VLANs	2048
Link aggregation	Yes
Flow control support	Yes
10G support	No
Policy-based routing	Yes
Virtual LAN features	Policy-based VLAN, VLAN Identifier ( VLAN ID)
Virtual LAN features
VLAN support	Yes
Number of VLANs	2048
Virtual LAN features	Policy-based VLAN, VLAN Identifier ( VLAN ID)
Data transmission
Multicast MAC address table	512 entries
Number of VLANs	2048
Multicast Listener Discovery (MLD) snooping	MLDv1 and v2
Jumbo frames	10000
Latency (10-100 Mbps)	56 µs
Latency (1 Gbps)	7.9 µs
Latency (10 Gbps)	3.4 µs
MAC address table	16000 entries
Switching capacity	36 Gbit/s
Number of queues	8
Jumbo frames support	Yes
Static route	Yes
Forwarding rate	26.8 Mpps
Performance
Stackable	Yes
Noise level	33 dB
Memory type	DDR3-SDRAM
Internal memory	512 MB
Flash memory	128 MB
Harmonized System (HS) code	85176990
Power
Power connector	AC-in jack
Power consumption (max)	21 W
Power supply included	Yes
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Input current	4.2 A
Technical details
Product colour	Gray
Stackable	Yes
Noise level	33 dB
Rack mounting	Yes
Security
Loop protection	Yes
BPDU filtering/protection	Yes
Authentication	MAC-based authentication, Port-based authentication, Web-based authentication
SSH/SSL support	Yes
Security algorithms	802.1x RADIUS, HTTPS, MD5, PEAP, SSH, SSH-2, SSL/TLS, TTLS
MAC address filtering	Yes
IGMP snooping	Yes
Access Control List (ACL)	Yes
Authentication type	IEEE 802.1x, Network Access Control (NAC), RADIUS
MAC address entries	Blackhole MAC address entries
DHCP features	DHCP client, DHCP relay, DHCP server, DHCP snooping, DHCPv6 client, DHCPv6 relay
Multicast features
Multicast MAC address table	512 entries
Multicast support	Yes
Multicast Listener Discovery (MLD) snooping	MLDv1 and v2
Certificates
Electromagnetic compatibility	EN55032 class A, FCC class A, VCCI class A, ICES-003 class A, EN55024, EN61000-3-2 (harmonic), EN61000-3-3 (flicker)
Certification	UL, cUL, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
Memory
Memory type	DDR3-SDRAM
Internal memory	512 MB
Flash memory	128 MB
Design
Product colour	Gray
Stackable	Yes
LED indicators	Yes
Electromagnetic compatibility	EN55032 class A, FCC class A, VCCI class A, ICES-003 class A, EN55024, EN61000-3-2 (harmonic), EN61000-3-3 (flicker)
Certification	UL, cUL, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
Rack mounting	Yes
Indication
LED indicators	Yes
Power over Ethernet (PoE)
Power over Ethernet (PoE) power per port	15 W
Power over Ethernet plus (PoE+) ports quantity	8
Total Power over Ethernet (PoE) budget	247 W
Power over Ethernet (PoE) ports quantity	16
Power over Ethernet (PoE)	Yes
Operational conditions
Storage temperature (T-T)	-30 - 70 °C
Storage relative humidity (H-H)	5 - 95%
Operating temperature (T-T)	0 - 65 °C
Operating relative humidity (H-H)	5 - 95%
Operating altitude	0 - 120000" (0 - 3048 m)
Heat dissipation	169 BTU/h
Weight & dimensions
Width	13.4" (341 mm)
Depth	9.09" (231 mm)
Height	1.73" (44 mm)
Weight	6.61 lbs (3 kg)
Packaging data
Package width	16.9" (430 mm)
Package depth	14.2" (360 mm)
Package height	5.91" (150 mm)
Package weight	9.59 lbs (4.35 kg)