Sidebar Sidebar Sidebar

ADD-GMCP-SX-5ST-ET - AddOn Networks ADDON 10/100/1000BASE-TX(RJ45) TO 1000BASE-SX(ST) MMF 850NM 550M POE MEDIA CONVE

Write a Review
$416.14
$231.19
(You save $184.95 )

Have questions?

Adding to cart… The item has been added
SKU: ADD-GMCP-SX-5ST-ET
Condition: Refurbished
Availability: In Stock
Weight: 1.00 LBS
Shipping: Calculated at Checkout
Connectivity technology: Wired
Power over Ethernet (PoE) ports quantity: 25
Converter input interface: 100Base-TX, 1000Base-TX
Internal: Yes
Maximum data transfer rate: 1000 Mbit/s
Fiber mode structure: Multi-mode
Package height: 6 (152.4 mm)"
Fiber optic connector: ST
Package width: 5 (127 mm)"
Converter output interface: 1000Base-SX
Ethernet LAN data rates: 10,100,1000 Mbit/s
Package depth: 2.01 (51 mm)"
Maximum transfer distance: 21653.5 (550 m)"
Ethernet LAN (RJ-45) ports: 1
Input voltage: 120 V
Package weight: 16 oz (453.6 g)
Ethernet interface type: Gigabit Ethernet
Power over Ethernet (PoE): Yes
Total Power over Ethernet (PoE) budget: 25 W
Wavelength: 850 nm
LED indicators: Yes
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX(ST) via a 850nm multi-mode fiber (MMF) ST connector, which allows distance reach up to 550m with EUR standard power supply. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper. This AC/DC powered PoE media converter is a power sourcing equipment (PSE), which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 and up UTP cable (cable length up to 100 meters / 330 feet). It complies with the IEEE802.3af standard. The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection and LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. This converter has a European plug.

Customers Also Viewed